The Modern Upholstered Headboard Platform Bed, model BD-PL-818-GRY, is an unbranded public-use and residential bed defined by clean, minimalist modern lines. Its low-profile 1050mm total height features a flat rear headboard profile that sits flush against standard walls, avoiding visual bulk in compact spaces. The split-panel headboard anchors the design, upholstered in 0.8mm matte grey faux leather over 30mm high-density polyurethane foam, accented by a 120mm diameter wood composite decorative inlay. Angled solid beech wood legs elevate the frame 150mm above the floor, supporting painted NC matte finish bed rails fitted with raised edge lips to hold mattresses securely without slippage during use. Built for long-term durability, the frame uses 18mm E1 grade engineered wood for its core, with 40mm thick side rails connected via M8-M10 bolts that provide a minimum of two fixing points per corner, supporting up to five controlled reassembly cycles. The base uses 15mm thick bent plywood or solid poplar slats spaced 80mm apart, reinforced by six recommended center support legs for even weight distribution. The entire unit holds a 500kg total static load, with a 150kg per-side user weight rating and 10,000-cycle durability for the bed base, eliminating the need for a separate box spring. Practical design features suit daily use across settings: the padded headboard offers comfortable back support for upright sitting, while the 150mm under-bed clearance accommodates robot vacuum access and under-bed storage bins. The bed fits an 1800x2000mm king size mattress, suited for two-adult daily use. It complements residential master bedrooms with modern neutral decor, urban contemporary apartments with light wood or grey palettes, and mid-range boutique hotel guest rooms, and pairs with a coordinating 2-drawer grey nightstand for a cohesive set, particularly well-suited to rooms with lower ceiling heights. Procurement teams should note the 10-year frame warranty, 5-year hardware warranty, and 2-year upholstery warranty. Units ship in two cartons per set, with a total packaged gross weight of 130kg, 0.9m³ packaging volume, and an 40-minute assembly time per unit. A net product weight of 85kg should be accounted for during installation and placement planning.