This light grey upholstered storage bed (model SB-Q-3PHD-4DR-01, unbranded) delivers a streamlined low-profile silhouette anchored by a fixed 3-panel padded headboard, aligned flush to the wall for a polished, tailored look. The frame sits on color-matched solid engineered wood block legs, with a consistent sleep surface height aligned to the side rail height for a clean, unbroken visual line, and matte light grey woven polyester upholstery stitched with color-matched thread for a seamless, soft contemporary finish. The bed’s core structure uses an 18 mm thick engineered particleboard and plywood frame, secured with zinc-plated steel cam lock and bolt connectors built to support up to 5 controlled assembly cycles for repeated setup or relocation. The fixed headboard features 30 mm thick high-density polyurethane foam padding wrapped in 100% woven polyester fabric tested for 50000 abrasion cycles and a lightfastness rating of 6 for long-term color retention. Mattress support comes from 12 mm thick multi-layer glued birch plywood slats, sized 70 mm wide with 75 mm gaps between them, eliminating the need for a separate box spring. Four full-extension pull-out drawers (two positioned on each long side of the frame) are constructed from 12 mm thick particleboard with fabric-lined interiors, operating on smooth nylon roller slides fitted with integrated stop mechanisms to prevent accidental full pull-out during use. The slatted base design enables consistent airflow under the mattress to reduce moisture buildup, and the frame supports a total static load of 500 kg, with a 400 kg static load reference for the bed frame and 60 kg per-slat load reference. This bed is designed for residential master bedrooms with light contemporary interiors, and is particularly well-suited for small to medium spaces where it can replace standalone dressers by integrating hidden storage without disrupting room aesthetics. It pairs best with matching 2-drawer nightstands placed symmetrically on either side of the headboard. Installation requires positioning against a flat wall with 600 mm of side clearance to allow full drawer extension, and the product is delivered as a flat-pack set requiring 40 minutes of on-site assembly with all included hardware. Procurement teams should note the compatible 1800 x 2000 mm mattress size and 300 mm recommended mattress thickness, packaged as two cartons per set with a total gross weight of 130 kg and total packaging volume of 0.9 m³ for logistics planning.