This light natural wood 4-seater rounded rectangular dining table, model DT-LNOAK-1200-RND-4S, features a refined minimalist Nordic aesthetic defined by soft, approachable lines and an open, uncluttered layout. The 25 mm thick tabletop uses a rounded-corner rectangular form with a 40 mm corner radius, supported by solid tapered cylindrical oak legs set 80 mm inward from each tabletop corner to create an open base that avoids visual heaviness. The 55 mm solid oak structural apron sits beneath the tabletop, paired with powder-coated steel transverse cross bracing for structural rigidity, while zinc-plated steel bolt and cam lock hardware secure all connections. The entire wood surface is finished with a 0.1 mm thick clear matte natural oil coating, highlighting the natural grain of kiln-dried solid light oak, with production-standard wood moisture content of 10% to support consistent material performance. Felt non-slip protective pads fitted to each leg base prevent scuffing on hard flooring and rugs, while small adjustable glides compensate for minor uneven floor surfaces. The table supports a distributed static load of 180 kg across the tabletop, with 70 kg static load capacity per leg and 12 Nm hardware joint torque resistance, alongside a wide leg stance that resists tipping when loaded with tableware and meals. Soft rounded corners reduce impact injury risk, while the 680 mm under-table knee clearance delivers unobstructed leg room for 4 diners, with seating for 2 people along each long side. The oiled matte finish supports simple spot cleaning and periodic re-oiling to extend service life, and the table ships flat-packed across 2 cartons for transport, with assembly completed in 40 minutes using the included hex key. Its 1200 x 800 x 760 mm footprint fits a wide range of settings, including compact residential dining rooms for small 4-person households, apartment kitchen nooks in limited-space open-plan layouts, casual home breakfast areas, small office break rooms for staff use, light-toned studio living spaces, and high-traffic vacation rental dining areas. When sourcing, note the unbranded design, 33 kg net product weight, 0.55 m³ total packaged volume across 2 cartons, 400-cycle surface abrasion resistance for the finish, and load-bearing tabletop sections that may use a 40 mm composite build-up to confirm alignment with project durability, space, and installation requirements.