| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions (closed, top retracted) | 1200 x 450 x 500 mm | |
|---|---|---|
| Tabletop panel thickness | 25 mm | |
| Storage base unit dimensions | 750 x 450 x 500 mm | |
| Cantilever support leg wall thickness | 40 mm | |
| Lift mechanism vertical travel height | 198 mm | |
| Extended tabletop cantilever overhang length | 450 mm | |
| Charging port panel recessed depth | 8 mm | |
| Floor clearance under storage base plinth | 10 mm | |
| Hidden under-top storage compartment internal dimensions | 700 x 400 x 120 mm | |
| Rounded corner radius on all panels | 20 mm | |
| Extended tabletop width across full span | 1200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Total product net weight | 49 kg | |
|---|---|---|
| Static distributed load capacity (fixed top section over storage base) | 45 kg | |
| USB port power output per port | 12 W | |
| AC outlet power rating (if equipped) | 1500 W | |
| Lift mechanism cycle durability rating | 10000 cycles | |
| Recommended maximum number of seated users for lifted work/dining use | 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Storage base structural panels | E1-grade MDF with light oak wood grain veneer | |
|---|---|---|
| Cantilever leg and lift trim panels | E1-grade MDF with matte off-white polyurethane paint finish | |
| Tabletop surface panels | E1-grade particle board with matching light oak laminate finish | |
| Lift and extension mechanism components | 2.5 mm thick hot-rolled steel with electrophoresis black anti-corrosion finish | |
| Edge banding on all panels | 1 mm thick PVC edge trim matching panel finish | |
| Base plinth floor contact pads | Non-marking 3 mm thick felt glides | |
| Charging port housing | ABS plastic with brushed silver metallic faceplate | |
| Internal storage compartment lining | Non-woven matte grey fabric lining | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Gas-spring assisted lift-top operation | Locks at fixed 698 mm work height, soft-close buffer prevents slamming | |
|---|---|---|
| Extendable rotating tabletop deployment | Swivels and slides out from storage base to create 900 mm total work depth | |
| Dual integrated USB charging ports | Provides 5V/2.4A output for charging mobile devices from sofa position | |
| Hidden enclosed storage compartment access | Revealed when lift top is raised, for stowing remote controls, blankets, or office supplies | |
| Cantilever leg anti-tip design | Structural steel bracket transfers extended top load to the storage base frame | |
| Flush-mounted top control slot | Houses lift release lever for one-handed operation without protruding hardware | |
| Fixed closed coffee table mode | Sits at 500 mm height for standard living room beverage and display use | |
| Lifted work/dining mode for sofa use | Positions top at ergonomic height for laptop work or casual dining while seated on sofa | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
推荐空间 / 目标用户 / 使用方式
| Small urban apartment living rooms | Dual-use coffee/dining/work surface saves floor space in compact open-plan layouts | |
|---|---|---|
| Sofa-side casual work setups | Lifted height supports laptop work for remote workers without a dedicated home office | |
| Casual in-front-of-sofa dining | Extended top provides sufficient surface area for takeout meals or movie-night snacks | |
| Open-plan lounge and reception areas | Two-tone oak/off-white finish fits modern minimalist, Nordic, and contemporary interior styles | |
| Charging station placement near seating | Integrated USB ports eliminate need for separate power strips near the sofa | |
| Hidden storage for living room clutter | Enclosed compartment stows remotes, charging cables, throw pillows, and reading materials |
欧洲市场准入与化学品要求
| EN 12521:2015 Furniture strength, durability, safety for residential tables | Applicable test standard for static load, impact, and stability performance | |
|---|---|---|
| EN 14749:2016 Safety requirements for domestic storage furniture and kitchens | Applies to structural safety of the integrated storage base unit | |
| EN 62368-1:2020 Safety for audio/video, information and communication technology equipment | Applies to safety of integrated USB/AC charging modules |
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural safety, dimensional tolerance, and finish quality of wood-based components | |
|---|---|---|
| GB 18580-2017 Formaldehyde emission limits for wood-based panels | Requires E1 emission grade for all engineered wood panels used in indoor furniture | |
| GB/T 4897.3-2003 Particle board for furniture use | Applies to structural performance of particle board tabletop components | |
| GB 7000.204-2008 Safety requirements for built-in furniture power outlets | Applies to integrated USB and AC charging port electrical safety |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to structural safety, dimensional tolerance, and finish quality of wood-based components； 2. GB 18580-2017 Formaldehyde emission limits for wood-based panels：Requires E1 emission grade for all engineered wood panels used in indoor furniture； 3. GB/T 4897.3-2003 Particle board for furniture use：Applies to structural performance of particle board tabletop components； 4. GB 7000.204-2008 Safety requirements for built-in furniture power outlets：Applies to integrated USB and AC charging port electrical safety； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
