商家入驻
首页 > 首页 > Residential Furniture > Living Room Furniture > Coffee Table > NCT-8060-GM-BW

Set of 2 Nesting Round Coffee Tables with Stone-Effect Top and Gunmetal Cylindrical Base Specifications

NCT-8060-GM-BW

代码:ZHBLFTV1
获取供应商报价
2026-09-11 13:35人气: 10
参数纠错历史记录(所有访客可见)
纠错时间修改字段原参数修改后参数说明 / 状态
暂无参数纠错记录,发现错误可点击行末旗标提交

NCT-8060-GM-BW

1家生产中供应商 >>
PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

overall set nested dimensions800 x 800 x 450 mm
large table top diameter800 mm
large table overall height450 mm
small table top diameter600 mm
small table overall height400 mm
table top thickness12 mm
base wall thickness2 mm
large base outer diameter550 mm
small base outer diameter420 mm
base cut-out clearance height280 mm
top overhang from base edge125 mm
edge radius of table top6 mm
Finished Top Thickness45 mm
Effective Knee Clearance680 mm high and 900 mm wide per main seat
Leg / Support Section80 mm main section with 2 mm metal wall
Cable Opening Size80 mm diameter; cable tray depth 120 mm
PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

total set net weight55 kg
large table top static distributed load100 kg
small table top static distributed load80 kg
base anti-slip foot pad load rating per unit70 kg
base finish scratch resistance3H pencil hardness
stone top heat resistance120 °C
surface stain resistance ratingGrade 5
recommended user count4 people
product limited warranty period3 years
Top Static Load Reference150 kg uniformly distributed
PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

large table topWhite marble-effect sintered engineered stone, matte finish, rounded polished edge
small table topBlack marble-effect sintered engineered stone with red veining, matte finish, rounded polished edge
table basesMatte gunmetal powder-coated carbon steel, cylindrical form with semi-circular interlocking cut-outs
base surface finishHigh-temperature baked polyester powder coat, scratch and rust resistant for indoor use
connection hardwareStainless steel M6 cross-head screws with reinforced nylon locking inserts
floor contact pads4 per table, non-slip non-marking TPE rubber pads, 8mm thickness
top-to-base adhesive layer2mm thick structural EVA foam buffer, industrial strength polyurethane adhesive
edge treatmentSmooth rounded chamfered edge, polished to match top surface finish
Primary Panel Thickness25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness2 mm
Metal Frame Wall Thickness2 mm cold-rolled steel
Primary Connector SpecificationReference M6-M8 with at least 2 fixing points per main support
PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

interlocking nesting featureSemi-circular base cut-outs allow small table to slide partially under large table
independent use capabilityEach table can be placed separately as a standalone side or coffee table
floor protectionIntegrated non-slip TPE pads prevent scuffing and sliding on hard flooring
surface maintenanceNon-porous stone top allows wipe-clean with soft damp cloth, no sealing required
fixed height designNo lifting or adjustment mechanisms, rigid fixed height for stable use
decor and utility useSupports drinkware, books, decorative objects and table lamps on flat tops
assembly requirementTop attaches to pre-finished base with included hardware, no on-site cutting needed
interlocking overlap when nested200 mm
Cable Management CapacityReference capacity 10power/data cables; tray load 10 kg
Reference Reassembly CountMain joints should support 5controlled assembly cycles
PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

Reference Package Count1 set / 2 cartons
Reference Assembly Time40 minutes per set
Reference Package Dimensions2100× 1100× 300 mm
Reference Packaged Gross Weight90 kg/set in 2 cartons
Reference Packaging Volume0.55 m³/set
PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

residential living roomPlaced in front of sofas for serving drinks, books and decorative display
small apartment or studioNesting design saves floor space when not using both tables
modern office reception areaServes guest refreshments and corporate decor in minimalist reception spaces
hotel lounge and guest roomUsed as occasional tables in lounge seating areas or premium suite seating zones
home staging and interior displayTwo-tone minimalist design complements modern, wabi-sabi and luxury interior schemes
recommended pairingMatches with low-profile fabric sofas and light-colored tile or wood flooring
STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015Furniture for domestic use, strength, durability and safety requirements for tables
EN 15372:2016Furniture for non-domestic use, durability and strength requirements for occasional tables
STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017General technical requirements for wooden furniture, applicable for hardware and structural stability checks
GB/T 4897.3-2003Particleboard for furniture use, applicable if core substrate is used under stone veneer
GB 18584-2001Indoor decoration material limit of harmful substances for wooden furniture, required for indoor air quality
招标文件标准化描述文本
本产品须满足以下技术参数要求:
1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for hardware and structural stability checks;
2. GB/T 4897.3-2003:Particleboard for furniture use, applicable if core substrate is used under stone veneer;
3. GB 18584-2001:Indoor decoration material limit of harmful substances for wooden furniture, required for indoor air quality;
最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告,可选择公制或英制单位。

PDF · NCT-8060-GM-BW

完整参数 Excel

导出全部商品信息与参数模块,文件内容统一使用英文。

XLSX · NCT-8060-GM-BW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-8060-GM-BW打开导出工具

页面快速操作

发布采购询价

产品描述

This set of 2 nesting round coffee tables, model NCT-8060-GM-BW, carries a refined modern minimalist silhouette defined by clean lines and a coordinated two-tone finish. The two circular tabletops feature rounded polished chamfered edges: the larger table displays a white marble-effect sintered engineered stone surface, while the smaller table uses black marble-effect sintered engineered stone with subtle red veining. Both tops are paired with matte gunmetal cylindrical carbon steel bases fitted with semi-circular interlocking cut-outs. When nested, the smaller table slides partially beneath the larger to form a cohesive, compact arrangement, and both pieces can also be positioned separately as standalone accent tables. Each tabletop is constructed from 12mm thick engineered stone with a matte finish, secured to its base via a 2mm structural EVA foam buffer and industrial strength polyurethane adhesive, fastened with stainless steel M6 cross-head screws with reinforced nylon locking inserts. The carbon steel bases feature a high-temperature baked polyester powder coat that delivers scratch resistance rated to 3H pencil hardness and indoor rust protection, with 2mm thick walls for rigid support. Four 8mm thick non-slip, non-marking TPE rubber pads sit at the base of each table to prevent floor scuffing and unwanted sliding. The non-porous stone tops resist stains at Grade 5, tolerate heat up to 120°C, and require no sealing, as spills and marks can be wiped away with a soft damp cloth. Static distributed load capacity reaches 100kg for the large tabletop and 80kg for the small tabletop, with no height adjustment mechanisms to ensure consistent rigid stability for holding drinkware, books, decorative objects and table lamps. This set is well suited for residential living rooms positioned in front of sofas, small apartments and studios where space-saving nesting design maximizes usable floor area, modern office reception areas for serving guest refreshments, hotel lounges and premium guest suites, and home staging projects. Its two-tone aesthetic complements modern, wabi-sabi and luxury interior schemes, pairing particularly well with low-profile fabric sofas and light-toned tile or wood flooring. For procurement, note the set ships in two cartons with a total packaged gross weight of 90kg, requires 40 minutes of on-site assembly with all included hardware and no on-site cutting, and is intended exclusively for indoor use.

参数纠错提交 - NCT-8060-GM-BW · ZHBLFT

修改错误参数(改动哪项就填哪项)

上传纠错凭证(产品实拍 / 规格书,选填)

最多 5 个文件,单个不超过 10MB;支持 JPG、PNG、WebP、PDF、Word、Excel。

错误说明与正确数据依据(必填)

联系方式(选填)

同类产品推荐

商品对比清单0