纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	540 × 630 × 880 mm
seat height	500 mm
seat width	480 mm
seat depth	430 mm
seat cushion thickness	80 mm
backrest height above seat	366 mm
backrest width	470 mm
leg diameter at floor contact	32 mm
front leg spread width	490 mm
rear leg splay depth	590 mm
knee clearance under seat	420 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net weight per chair	18 kg
static seat load capacity	136 kg
cushion foam density	45 kg/m³
foam rebound rate	55%
upholstery abrasion resistance	30000 Martindale cycles
seam stitch pitch	8 stitches per 30 mm
structural joint cyclic load rating	10000 cycles
leg floor protection pad diameter	25 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

legs and support frame	Walnut-finished solid rubberwood, 25mm section thickness
seat suspension base	12mm thick plywood support panel under cushion
seat cushion padding	High-density polyurethane foam, wrapped in 20g Dacron batting
backrest padding	30mm thick medium-density polyurethane foam
upholstery fabric	Woven linen-look polyester, 0.6mm fabric thickness
frame joinery hardware	Zinc-plated steel corner brackets and wood screws
floor contact pads	Felt anti-scratch pads affixed to each leg base
back support rails	Solid wood cross brace between rear legs
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

fixed seating position	No tilt, swivel or height adjustment, stable 4-point floor contact
floor leveling capability	Minor height adjustment via felt pad shims at leg bases
partial knockdown assembly	Legs attach to seat frame with included hardware, no special tools required
stackable configuration	Non-stackable fixed frame design, intended for stationary dining placement
back support ergonomics	Curved oval back aligns with lumbar region for upright dining posture
seat edge comfort	Rounded front seat edge reduces pressure on back of thighs
upholstery maintenance	Spot-cleanable woven fabric resists light staining for regular use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential dining room	Seating for 6seat dining tables, matches mid-century modern interiors
kitchen breakfast nook	Casual seating for kitchen counter-height or standard tables
home office guest seating	Side seating for home desk or meeting nook areas
café and bistro seating	Light commercial use for casual dining venues
hotel guest room seating	Compact side chair for hotel room desk or lounge corner
small apartment multi-use space	Space-efficient seating for combined living and dining areas
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Domestic furniture strength, durability and safety for seating units
EN 1022:2018	Stability test standard for non-adjustable residential seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to wood frame chairs
GB/T 16799-2008	Upholstered furniture durability safety requirements for fixed seating

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to wood frame chairs；
2. GB/T 16799-2008：Upholstered furniture durability safety requirements for fixed seating；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DC-OW-TW-540630880

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DC-OW-TW-540630880

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DC-OW-TW-540630880打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Century Modern Armless Upholstered Dining Chair, model DC-OW-TW-540630880, carries a streamlined, timeless silhouette defined by clean, unadorned lines aligned with classic mid-century modern design language. Its fixed four-leg base supports a contoured, curved oval backrest paired with a generously proportioned seat, with no protruding armrests to keep visual weight light and flexible for close placement against tables or wall nooks. The frame is constructed from solid rubberwood finished in a warm walnut tone, with a 25mm section thickness, reinforced by zinc-plated steel corner brackets, wood screws, and a solid wood cross brace between rear legs for structural rigidity. Each leg is fitted with felt anti-scratch pads at the base to protect floor surfaces. The seat rests on a bent plywood support panel, topped with high-density polyurethane foam wrapped in soft Dacron batting, while the backrest features medium-density foam padding. All padded surfaces are upholstered in a rich burnt orange, linen-look woven polyester fabric, with precise, durable stitching across all seams. Ergonomic details are integrated for extended sitting comfort: the curved backrest aligns with the lumbar region to support upright dining posture, and the rounded front seat edge reduces pressure on the backs of the thighs. The chair holds a fixed seating position with no tilt, swivel, or height adjustment, delivering stable four-point floor contact, with minor leveling adjustments possible via the felt leg pads. The upholstery resists light staining and supports simple spot cleaning for regular upkeep. It ships in partial knockdown form, with legs attaching to the seat frame via included hardware and no special tools required for assembly; it is not stackable, designed for stationary placement. This chair fits seamlessly across both residential and light commercial settings, including home dining rooms paired with mid-century modern interiors, kitchen breakfast nooks, home office guest areas, compact multi-use small apartment spaces, casual cafes and bistros, and hotel guest room desk or lounge corners. Procurement teams and residential buyers should note the fixed, non-adjustable design is suited for standard table heights, plan for 40 minutes of assembly time per unit, account for packaging split across two cartons per set, and reference provided load capacity and fabric abrasion ratings to confirm alignment with intended use frequency and traffic levels.

Mid-Century Modern Armless Upholstered Dining Chair Specifications

供应商与现货