The Modern Molded Shell Upholstered Dining Armchair with Splayed Wood Legs (model DAC-MLD-001-RED-GRY) delivers a clean, minimalist silhouette defined by its smooth one-piece molded seat and back shell, paired with outward splayed solid wood legs. The integrated wrap-around armrests flow seamlessly from the contoured backrest, creating a unified, streamlined visual profile with no disjointed hardware or exposed fasteners across the upper structure. The matte shell is finished with fully rounded edges, including a curved back cutout, for a soft, approachable look complemented by the natural warm tone of the finished wood legs. The chair’s construction centers on a 6mm thick matte molded polypropylene shell, supported by 28mm diameter solid beech wood legs finished with a natural clear coat. Connections between the shell and leg frame use metal-reinforced wood dowel joinery for structural stability, while a 14mm bent plywood internal support board reinforces the seat pan. The recessed seat holds a friction-fit cushion with a high-resilience 35 kg/m³ polyurethane foam core, wrapped in woven polyester blend fabric tested to 30000 Martindale abrasion cycles, with 45% foam rebound for consistent comfort. Each leg base is fitted with 5mm thick non-marking nylon glide pads to protect floor surfaces, and all shell edges are molded smooth with no sharp corners. Designed for upright, supportive seating during meals, meetings or short breaks, the chair supports a static load capacity of 136 kg, with per-leg joint static load ratings of 150 kg. The fixed non-stackable frame features a wipe-clean polypropylene shell and removable cushion for straightforward upkeep. The product ships as a knock-down assembly with all required hardware included, with an assembly time of 40 minutes per unit. This armchair suits a wide range of indoor settings, including residential dining areas paired with standard 750mm height dining tables, casual cafes and light-contract food service spaces, office meeting rooms and collaborative breakout zones, co-working shared areas, small apartment home offices as compact dual-use desk seating, and indoor reception or waiting lobbies. It is available in 7 color variants to match diverse interior palettes. Procurement teams should note units ship 1 set across 2 cartons, with a packaged gross weight of 23 kg per set, and plan for 40 minutes of on-site assembly per unit. Each chair has a net weight of 8.4 kg, with a 460mm seat height aligned to standard dining and desk surface heights.