The Armless Upholstered Curved Pleated Back Dining Chair, model DC-PLB-001, carries an unbranded positioning aligned with modern minimalist light luxury styling, defined by a streamlined fixed shell silhouette. Its visual design centers on a continuous wrap-around curved back finished with precise pleated detailing, accented by matching PU leather welt trim along all edges, supported by four gently tapered solid wood legs that carry a soft matte finish. The armless, low-profile form is engineered to tuck fully under standard table surfaces when not in use, eliminating visual clutter in occupied spaces. The chair’s construction balances durability and seated comfort. Its seat and back shell is built around a 12 mm thick molded plywood internal frame, paired with a 14 mm bent plywood seat support board and 50 mm wide elastic webbing to stabilize cushioning. All padded surfaces are wrapped in 1.2 mm thick PU faux leather, filled with high-density polyurethane foam rated at 45 kg/m³ with a 60% rebound rate; the seat cushion measures 80 mm thick for consistent support. Tapered solid rubberwood legs attach via zinc-plated steel screw brackets, capped with 5 mm thick non-marking, anti-slip rubber pads to protect flooring. The upholstery is tested to withstand 50000 rub cycles, with a stain-repellent surface for easy upkeep. Each chair supports a recommended static load of 180 kg, with a fixed 100-degree upright seating angle that delivers consistent posture support, and a non-stackable fixed shell structure. Overall dimensions measure 580 x 620 x 820 mm, with a 480 mm seat height, 500 mm seat width, 450 mm seat depth, and 370 mm backrest height; each unit weighs 8.2 kg net. It suits a broad range of spaces: residential dining rooms and small apartment nooks, where its tuckable design saves valuable floor space; commercial settings including cafes, boutique hotels, and upscale bistros; casual conference and negotiation areas; modern showrooms and model home staging displays; and open office break zones for casual seating and collaboration. Procurement teams should note the product ships knock-down, requiring 40 minutes of assembly per set, with each set packaged across 2 cartons holding a total packaged gross weight of 23 kg and occupying 0.26 m³ of volume. A 20GP shipping container can hold 135 sets at 85% space utilization, supporting efficient bulk order planning for commercial and multi-unit residential projects. The PU surface only requires simple wiping for routine cleaning, reducing long-term maintenance labor across high-traffic installations.