The Two-Tone Curved Upholstered Dining Armchair, model DAC-TT24-ML01, features a sleek, modern visual profile defined by smooth, continuous curved armrests integrated with the backrest shell, and a striking two-tone upholstery scheme. The inner seat and back surfaces are finished in light off-white PU leather, while the outer back panel is dark grey, accented by contrast color stitched PU piping along all edges for a refined, tailored look. The chair sits on a static four-leg base constructed from powder-coated dark metal, with legs splayed 8 degrees outward from vertical to deliver balanced visual appeal and structural stability. Beneath the upholstery, the internal seat frame is crafted from 12 mm thick plywood, wrapped in high-resilience foam padding: the seat cushion uses 45 kg/m³ high-density polyurethane foam with a 42% rebound rate, while the back shell uses 38 kg/m³ medium-density foam. The 1.5 mm thick powder-coated dark carbon steel legs are capped with non-marking injection-molded polyethylene foot caps to prevent floor scuffs. All upholstery is bonded with low-VOC water-based contact cement, and the surface holds a 50,000 double rub abrasion resistance rating, with seam stitching set at 8 stitches per inch for durable wear. Each chair weighs 9 kg, with a recommended static load capacity of 150 kg. Overall dimensions measure 660 x 572 x 902 mm, with a 508 mm seat height aligned to standard dining table surfaces. The water-resistant PU upholstery wipes clean easily for simple maintenance, and the 100-degree upright back angle delivers ergonomic support for seated posture. The fixed splayed leg design removes moving parts for long-term reliability, while the compact footprint fits a range of layouts. The chair is suitable for a wide array of spaces: residential dining rooms for everyday family meals, high-turnover restaurants and cafes, open-plan kitchen islands for casual counter-height dining, small home offices for short-term guest seating, hotel banquet setups as coordinated auxiliary event seating, and covered apartment balconies for al fresco dining sets. Procurement teams should note the unit is supplied as knock-down assembly with all required hardware included, with a reference assembly time of 40 minutes per set. Orders are packaged as one set across two cartons, with a total packaged gross weight of 23 kg and total carton volume of 0.26 m³ per set, ideal for bulk shipping and inventory planning for residential, hospitality, and commercial food service projects.