纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 590 × 850 mm
Seat height	480 mm
Seat width	520 mm
Seat depth	470 mm
Seat cushion thickness	80 mm
Backrest height above seat	370 mm
Armrest height above seat	220 mm
Armrest total height above floor	700 mm
Leg outer spread width	580 mm
Leg spread depth	570 mm
Wood frame leg thickness	35 mm
Floor glide diameter	20 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per chair	14 kg
Static load capacity	300 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Fabric Martindale abrasion resistance	30000 cycles
Recommended user weight	150 kg
Seam stitch pitch	8 stitches per 30mm
Frame joint static load durability	10000 cycles
Available color variants	4
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Frame structure	Kiln-dried solid hardwood with dark walnut stain, mortise-and-tenon joinery
Seat cushion fill	High-resilience polyurethane foam wrapped in soft polyester batting
Backrest padding	25mm thick medium-density polyurethane foam over rigid wood back support
Upholstery fabric	Light beige vertically ribbed woven polyester fabric with matte finish
Armrest caps	Solid walnut-stained hardwood with rounded smooth edges, no upholstery
Leg construction	Tapered splayed solid hardwood legs, angled outward for stability
Floor glides	Black non-marking injection-molded plastic glides attached to leg bottoms
Frame finish	Matte nitrocellulose lacquer walnut stain, scratch-resistant clear topcoat
Cutout arm detail	Y-shaped arched cutout on front arm supports, solid wood carved construction
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed upright seating position optimized for standard 760 mm dining tables
Back support	Curved semi-enclosed wrap back provides mid-back and lumbar support for mealtime seating
Armrest function	Integrated wood armrests support forearms while seated, allow easy sliding under 700mm+ apron tables
Floor protection	Non-marking plastic glides prevent hardwood, tile, or vinyl floor scuffing during use
Stability design	Splayed four-leg configuration provides 580mm wide support base to prevent tipping
Assembly requirement	Minimal knock-down assembly of legs to seat frame with included hardware
Upholstery maintenance	Stain-resistant fabric finish allows spot cleaning with mild detergent for food/drink spills
Stacking compatibility	Non-stackable fixed frame design, intended for permanent placement around dining tables
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Seating for 6people around standard rectangular or round dining tables in homes
Kitchen breakfast nook	Compact armchair for island or breakfast table seating, neutral tone matches wood kitchens
Cafe and bistro seating	Durable fixed seating for casual dining venues with mid-century modern interior design
Home office guest seating	Side chair for placement in front of writing desks or in home office meeting areas
Co-working lounge breakout area	Seating around small cafe tables in collaborative office break spaces
Small apartment open plan living	Compact footprint dining seating that does not overwhelm small multi-use living spaces
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Domestic furniture strength, durability and safety requirements for seating, applicable to dining chairs
EN 1022:2018	Seating furniture stability test standard, applicable to four-leg splayed frame chairs
EN 13759:2002	Upholstered furniture resistance to ignition standard for domestic use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applies to solid wood dining chair frame and finish
GB/T 1952.1-2012	Safety, strength and durability requirements for upholstered seating furniture, domestic use
GB 18584-2001	Limits of harmful substances in wooden furniture, applies to formaldehyde emission from wood finishes
GB/T 29894-2013	Performance requirements for furniture upholstery fabrics, applies to abrasion and color fastness

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applies to solid wood dining chair frame and finish；
2. GB/T 1952.1-2012：Safety, strength and durability requirements for upholstered seating furniture, domestic use；
3. GB 18584-2001：Limits of harmful substances in wooden furniture, applies to formaldehyde emission from wood finishes；
4. GB/T 29894-2013：Performance requirements for furniture upholstery fabrics, applies to abrasion and color fastness；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DCH-WAL-RIB-BG-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DCH-WAL-RIB-BG-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DCH-WAL-RIB-BG-01打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded mid-century styled upholstered dining armchair, model DCH-WAL-RIB-BG-01, features a streamlined, timeless silhouette defined by a curved semi-enclosed wrap back, integrated solid wood armrests with Y-shaped arched cutouts on front supports, and tapered splayed legs angled outward for visual balance. The frame is crafted from kiln-dried solid hardwood finished with a matte nitrocellulose walnut stain and scratch-resistant clear topcoat, joined with traditional mortise-and-tenon joinery for structural integrity. Armrest caps are carved from the same walnut-stained hardwood with smooth rounded edges, free of upholstery for a warm textural contrast to the seating surfaces. Seating and back support are built with layered padding: an 80mm thick seat cushion filled with 45 kg/m³ high-resilience polyurethane foam wrapped in soft polyester batting, paired with 25mm thick medium-density foam over a rigid wood back support, all upholstered in light beige vertically ribbed matte woven polyester fabric with a stain-resistant finish. Black non-marking injection-molded plastic glides are fitted to leg bases to protect floor surfaces. The chair supports a fixed upright seating position optimized for standard 760mm dining tables, with mid-back and lumbar support from its contoured back, and armrests sized to slide easily under tables with 700mm or higher aprons. The splayed four-leg configuration creates a stable support base, and the stain-resistant fabric allows simple spot cleaning of food or drink spills with mild detergent. This design fits a wide range of settings, including residential dining rooms, kitchen breakfast nooks, mid-century modern cafes and bistros, home office guest areas, co-working breakout lounges, and compact open-plan small apartments, where its neutral tone and compact footprint complement wood finishes and multi-use layouts without overwhelming limited space. For procurement, note that units ship in two cartons per set, require 40 minutes of minimal assembly to attach legs to the seat frame with included hardware, have a 14kg net weight per chair, 300kg static load capacity, 30,000-cycle Martindale fabric abrasion rating, and a recommended user weight of 150kg. Logistics parameters include a 23kg packaged gross weight per set, 0.26 cubic meter carton volume, and 135-set loading capacity for a 20GP container at 85% space utilization.

Mid-Century Walnut-Stained Wood Frame Ribbed Light Beige Upholstered Dining Armchair Specifications

供应商与现货