The Black and Red High-Back Racing Gaming Chair, model UGC-HB-BKRD-01, presents a bold racing-style silhouette with a tall contoured backrest, bucket-seat shaping, and coordinated black and red upholstery. Red piping along the backrest side seams and horizontal stitched seat panels reinforce the performance-oriented look. The chair occupies a 700 by 700 mm footprint and stands 1410 mm high, with a 600 by 850 by 130 mm backrest and a 560 by 565 mm seat. Its matte black five-star base and twin-wheel casters complete the visual layout while keeping the form suitable for desk-based settings. Construction centers on a welded 1.5 mm steel tubular frame with black anti-corrosion powder coating. The back uses 80 mm molded polyurethane foam over the frame, while the seat combines 110 mm molded foam at 45 kg/m3 density with a 12 mm multi-layer plywood board secured to the tilt mechanism by steel inserts. Both back and seat are covered in 1.0 mm black and red PU/PVC faux leather. Support components include a Class 4 black steel gas lift with a 50 mm outer tube, a 3 mm powder-coated steel rocker plate, a 350 mm radius glass-filled nylon base, padded adjustable armrests, and 60 mm twin-wheel casters. Functional adjustment is designed for extended computer use. A pneumatic side lever changes seat height from 450 to 530 mm through a 100 mm stroke. The back reclines 180 degrees and locks in five positions, while the rocker mechanism allows 12 degrees of backward tilt with adjustable tension for users up to 150 kg. The chair rotates 360 degrees, and each caster also swivels independently for omnidirectional movement. Armrest pads sit 230 mm above the seat, slide fore and aft by 30 mm, and rotate 15 degrees. A contoured 70 mm central lumbar zone provides lower-back support without a separate pillow. The chair fits home PC gaming stations, esports training rooms, home offices, streaming or content-creation setups, shared computer labs, and dormitory or bedroom study areas. It is specified for users up to 150 kg and 1900 mm tall, and pairs with a 760 mm high gaming desk. The wipeable surface and 50000-cycle abrasion target suit rotating users, while the five-caster base is intended to protect floor surfaces during movement. For procurement, note that this is an unbranded gaming chair supplied as one set in two cartons, with a reference assembly time of 40 minutes per set. The net weight is 27 kg, packaged gross weight is 23 kg per set, and reference carton dimensions are 850 by 420 by 720 mm. Carton volume is 0.26 m3 per set, with indicative loading of 135 sets in a 20GP container at 85 percent space utilization. The static base verification load is 1000 kg.