The Mustard Yellow Upholstered Curved-Back Lounge Chair is a single-person leisure seat defined by a continuous wraparound form. Its curved back rises into integrated armrests and side panels, creating an enclosed resting zone with a soft, contemporary silhouette. The broad upholstered side panels extend toward the floor and conceal the lower rails, giving the chair a freestanding, molded appearance suited to accent placement. The mustard yellow upholstery provides a strong visual focus, while the pebble-grain surface and edge stitching add tactile detail. Construction combines an 18 mm curved plywood or high-density composite shell with a 25 by 25 mm square steel inner frame. A 12 mm bent composite or plywood deck supports the seat, and rigid upholstered panels form the floor-contacting sides. The outer cover is a pebble-grain leather-look fabric or microfiber leather with a fine matte texture and an upholstery thickness of 1.2 mm. Padding includes a 90 mm finished seat cushion using 120 mm polyurethane foam at 35 kg/m3, and a 70 mm padded backrest using 60 mm polyurethane foam at 30 kg/m3. Polyester bonded thread is used for edge stitching. The chair weighs 24 kg and is rated for a static seat load of 160 kg, with a recommended user weight of 120 kg. The integrated side panels rise from the floor into continuous arm supports, while the curved back and arms deliver wraparound posture support. The back is fixed at an 11-degree rearward lounge angle, promoting relaxed sitting without a reclining mechanism. As a non-folding, single-unit chair, it rests directly on its two broad side panels and requires no bolts or wall fixing. Recommended concealed pads at the four lower panel corners help reduce slipping and floor abrasion. A removable bottom closure allows frame inspection while the outer upholstery remains fixed. This model is well suited to hotel guestrooms and lobby corners, office or studio reception areas, residential reading corners and living rooms, bedroom dressing areas, showroom displays, and supervised low-intensity senior living lounges. It can be used alone as an accent seat or arranged in groups of two to four in waiting settings. Procurement teams should note the model number LCS-CURV-860 and its unbranded supply status. Each set ships in two cartons, with a reference assembly time of 40 minutes. Clearance between the armrests is 540 mm, seat height is 420 mm, under-seat clearance is 80 mm, and the wraparound support zone is 860 mm wide. Buyers should confirm the preferred upholstery option, pad inclusion, color consistency, delivery packaging, and assembly requirements before placement.