The Fabric Upholstered Lounge Chair with Black Metal Frame is an unbranded one-person lounge chair, model LCH-BMF-780, designed for relaxed seating in both commercial and residential interiors. Its rounded lounge form combines a tall curved back, integrated armrests, and a four-leg metal frame, giving the chair a soft yet structured appearance. Grey woven fabric upholstery provides a dense mixed-yarn visual texture that contrasts with the matt black frame, while the continuous tubular side structure creates a clean perimeter around the seat and back. The chair is built around a black round-tube steel frame with smooth continuous bends forming the legs, arm supports, and side frame. The frame has a black powder-coated finish, and small black polymer glides are fitted to all four exposed leg ends. Inside, the seat uses a rigid plywood or molded composite board supported by elastic webbing. The seat cushion is padded with high-resilience polyurethane foam and a soft polyester fiber top layer, while the curved back panel carries a polyurethane foam pad with a fabric-laminated finish. Padded fabric-covered sleeves are fitted over the horizontal metal arm rails for softer forearm contact. Functionally, the chair offers a fixed relaxed lounge posture rather than swivel or caster-based mobility. The seat height is 420 mm and the backrest is angled at 105 degrees from horizontal, supporting a comfortable reclined seating position. The curved back rises to shoulder height and wraps around the upper body for lateral enclosure, while the integrated arms provide support 210 mm above the seat. The padded arm sleeves are 260 mm long, and the 540 mm clear width between armrests gives each occupant defined personal space. A 240 mm lumbar support zone adds structured back support, and the open under-seat frame allows broom or vacuum access at the 250 mm floor clearance. The polymer end caps protect hard floors and permit light repositioning. Overall dimensions are 780 x 760 x 820 mm, with a finished seat cushion thickness of 90 mm, backrest padding thickness of 70 mm, and a net weight of 15 kg. The recommended user weight is 140 kg, seating capacity is one person, and the static frame verification load is 420 kg. This chair suits office relaxation zones, informal touchdown areas, reception and waiting spaces, hotel lobbies, co-working breakout zones, quiet corners, assisted-living lounges, and residential living rooms, studies, or bedroom reading corners. It can be used individually as an accent seat or in pairs beside a coffee table. Procurement planning should note that each set is supplied in two cartons, with reference assembly time of 40 minutes, packaged gross weight of 23 kg, carton volume of 0.26 cubic meters, and indicative loading of 135 sets in a 20GP container at 85 percent space utilization.