The Burgundy High-Back Swivel Reclining Lounge Chair with Matching Ottoman offers a coordinated seating solution for relaxed interiors. Its smooth burgundy upholstery creates a defined accent, while the high-back silhouette, continuous padded arms, segmented back cushions, integrated headrest, and separate ottoman produce a structured yet comfortable lounge form. The chair and ottoman share dark four-spoke pedestal bases, giving the set a consistent visual profile suited to residential-style layouts. Overall chair dimensions are 770 x 1070 x 1160 mm, ottoman dimensions are 550 x 490 x 500 mm, and the seat is 560 mm wide, 540 mm deep, and 445 mm high. The backrest height is 760 mm, with a 560 x 210 x 130 mm headrest cushion and arm support 210 mm above the seat. Construction combines cushioned comfort with a supportive internal structure. The seating surface uses burgundy smooth upholstery in leather or PU construction. The seat cushion contains high-resilience polyurethane foam with a 120 mm pad depth, while the back cushion uses layered polyurethane foam and soft fiber fill at 100 mm thickness. Three vertically segmented padded back zones follow the reclined spine angle, and the integrated padded headrest supports the head and neck. The internal seat frame is made with hardwood or engineered wood using 25 mm structural members, paired with a 1.5 mm steel recliner bracket and pivot hinges. Both pedestals use black powder-coated steel four-spoke bases; the chair base has a 2.0 mm wall section, and the central swivel mechanism uses a steel radial bearing with a nylon wear sleeve. Manual operation allows the back to recline to 145 degrees through body pressure and a side or concealed latch. The chair rotates 360 degrees on a fixed-height central bearing without a gas lift. The matching ottoman supports the lower legs independently, so leg elevation is not tied to the recline mechanism. Fixed continuous padded arms provide consistent upper-body support. The set swivels in place but has no casters and is not intended for frequent rolling between rooms. The recommended user weight is 150 kg, with static load references of 180 kg for the seat and 80 kg for the ottoman; upholstery acceptance targets 30,000 abrasion cycles. This model works well in a living room reading corner with a rug and round side table, in a bedroom beside a bed or window, or as an accent seat in an apartment with neutral or dark interiors. It also fits hotel lounges, guest suites, and executive quiet rooms where short rest or informal recovery is prioritized over task-oriented work. Procurement teams should note the unbranded model ULR-HB4S-BR-01 is supplied as one set in two cartons, with a 40-minute reference assembly time, 26 kg chair net weight, 23 kg packaged gross weight per set, and 0.26 m³ carton volume. An indicative 20GP container loads 135 sets at 85 percent space utilization.