| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| Finished Top Thickness | 50 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Workstation distributed desktop load | 80 kg | |
|---|---|---|
| Single cabinet shelf load | 25 kg | |
| Rollaway bed static load | 150 kg | |
| Rollaway bed recommended user weight | 120 kg | |
| Mattress foam density | 35 kg/m3 | |
| Seating capacity | 1 person | |
| Bed occupancy | 1 adult | |
| Pull-out bed rolling cycle target | 10000 cycles | |
| product net weight | 145 kg | |
| Top Static Load Reference | 150 kg uniformly distributed |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Work surface | 25 mm melamine-faced particleboard with light oakgrain finish and sealed PVC edges | |
|---|---|---|
| Privacy screen fabric | Dark gray woven fabric over panel core with straight stitched or trimmed edges | |
| Screen infill panel | Light gray smooth panel section in an aluminum or steel extrusion frame | |
| Side cabinet doors | Light oakgrain melamine door and white melamine side/end panel | |
| Cabinet carcass | Melamine-faced board panels with concealed hinges and vertical storage cavity | |
| Vertical support legs | White powder-coated square steel or aluminum legs with leveling feet | |
| Under-desk modesty panels | Light gray rigid panel with horizontal trim and metal vertical posts | |
| Bed frame | Light gray powder-coated steel folding tube frame with welded or bolted U-shaped end frames | |
| Mattress | Gray fabric upholstery over 80 mm foam pad divided into three hinged cushion sections | |
| Casters | Black twin-wheel nylon casters with metal mounting stems on the bed frame | |
| Fasteners and hinges | Steel hinges, connector bolts, cam locks, and leveling feet for knock-down installation | |
| Edge and frame trims | PVC edge banding on board components with silver-gray metal or plastic screen extrusions |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| L-shaped work layout | Continuous corner desktop provides a primary writing zone and a perpendicular return zone for documents or devices | |
|---|---|---|
| Privacy division | Three low divider panels enclose the rear and sides to separate adjacent workers without blocking room visibility | |
| Integrated guest bed | Three-section upholstered bed pulls out from the under-desk cabinet and unfolds into a 1900 mm single sleeping surface | |
| Under-desk storage | Open front cabinet cavity conceals the folded bed and provides side-door access when the bed is stowed | |
| Mobile bed deployment | Four or more swivel casters allow the folded bed to roll straight out from the knee opening | |
| Folding mattress support | Hinged steel sections align the three cushion segments into a flat platform and fold compactly for storage | |
| Leveling installation | Desk support feet adjust independently to compensate for uneven office flooring | |
| Cable routing | A circular grommet at the rear corner provides cable passage from desktop devices toward the underside | |
| Side access door | Hinged light wood door swings outward to expose the bed-storage cavity and limit access swing clearance | |
| Knock-down assembly | Desktop, screen panels, cabinets, legs, and bed frame ship as separate components for on-site assembly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Largest carton dimensions | 1850 x 760 x 180 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Open-plan office | Suits one-person focused workstations where staff need visual division and an occasional on-site rest option | |
|---|---|---|
| Shift-based workplace | Useful for control rooms, medical offices, security posts, and 24-hour operations requiring short rest periods | |
| Staff rest or duty room | Provides combined computer work, document storage, and temporary sleeping without needing a separate guest bed | |
| Small private office | Maximizes limited space by combining an L-shaped desk, side storage, divider panels, and visitor rest surface in one unit | |
| Emergency overnight office | Supports contingency overnight stays where a compact single bed is required for one adult | |
| Procurement configuration | Recommended for projects requiring coordinated light oak, white, gray fabric, and black caster finishes across multiple workstations | |
| Facility-managed installation | Requires clear front clearance for bed pull-out and door swing, making layout planning essential before row installation |
欧洲市场准入与化学品要求
| EN 527-1:2011 applicability | Office desks and worktables safety, strength, and durability requirements for the seated work surface | |
|---|---|---|
| EN 527-2:2011 applicability | Office desk dimensional safety requirements, including desk height and leg-room clearance verification | |
| EN 16139:2013+A1:2024 applicability | Strength, durability, and stability requirements for non-domestic seating, applicable to the foldaway bed support if used as rest seating | |
| EN 1022:2018 applicability | Seating stability test method, suitable for evaluating the unfolded bed frame on a level floor | |
| EN 13722:2004 applicability | Furniture test methods for beds, applicable to folding bed strength and sleep-surface stability | |
| EN 71-1:2014+A2:2023 applicability | Useful sharp-edge and pinch-point reference if the workstation is installed in family-accessible office areas |
美国及加拿大家具标准
| ANSI/BIFMA X5.5-2021 applicability | Office desk strength, durability, and structural safety tests for desktop, legs, and modesty supports | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 applicability | Storage cabinet performance tests for doors, shelves, hinges, and stability of the integrated cabinet | |
| ANSI/BIFMA X5.4-2022 applicability | Lounge seating strength and durability reference for the cushioned folding rest surface if classified as office lounge seating | |
| ANSI/BIFMA X5.1-2017 (R2022) applicability | Seating structural test reference where foldaway bed use includes seated loading rather than sleeping only | |
| ANSI/BIFMA e3-2024 applicability | Sustainability certification framework for panel materials, finishes, low-emission cores, and supplier chemical documentation |
适用于中国市场项目的标准
| GB/T 3324-2024 applicability | General technical requirements for wooden furniture, applicable to dimensional accuracy, edge finishing, and panel workmanship of board components | |
|---|---|---|
| GB/T 3325-2017 applicability | Metal furniture technical requirements, applicable to the steel bed frame, support legs, coating, and welded or bolted joints | |
| GB/T 3326-2016 applicability | Furniture dimensional inspection, applicable to verifying desktop height, clearance, bed size, and cabinet dimensions | |
| GB 18580-2017 applicability | Formaldehyde emission limit for wood-based panels, applicable to particleboard components used in indoor office furniture | |
| GB/T 10357.6-2013 applicability | Furniture mechanical test for single-bed strength and stability, suitable as a bed-frame acceptance reference | |
| GB/T 27921-2011 applicability | Risk management guidance for packaging, handling, assembly instructions, and small-part safety documentation |
本产品须满足以下技术参数要求： 1. GB/T 3324-2024 applicability：General technical requirements for wooden furniture, applicable to dimensional accuracy, edge finishing, and panel workmanship of board components； 2. GB/T 3325-2017 applicability：Metal furniture technical requirements, applicable to the steel bed frame, support legs, coating, and welded or bolted joints； 3. GB/T 3326-2016 applicability：Furniture dimensional inspection, applicable to verifying desktop height, clearance, bed size, and cabinet dimensions； 4. GB 18580-2017 applicability：Formaldehyde emission limit for wood-based panels, applicable to particleboard components used in indoor office furniture； 5. GB/T 10357.6-2013 applicability：Furniture mechanical test for single-bed strength and stability, suitable as a bed-frame acceptance reference； 6. GB/T 27921-2011 applicability：Risk management guidance for packaging, handling, assembly instructions, and small-part safety documentation； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
Admin WhatsApp
