The Two-Person L-Shaped Partition Office Workstation with Mobile 3-Drawer Pedestal (model L-WS1600MP, unbranded) balances collaborative accessibility with individual work separation for commercial settings. Visually, the unit features a light maple melamine worktop finish paired with a crisp white steel frame, low-profile frosted semi-transparent privacy dividers, and smooth curved knee cutouts for a clean, modern aesthetic. Its connected L-shaped layout positions two adjacent work zones across a 2800 x 1600 x 1100 mm footprint, with each worktop arm extending 1600 mm at 700 mm depth, set to a standard 750 mm work surface height. Constructed for durable daily use, the workstation uses E1-grade melamine-faced MFC for worktops and the mobile pedestal body, finished with 2 mm thick PVC edge trim to protect against impact. The support structure relies on 1.2 mm thick white powder-coated steel tube legs, paired with frosted acrylic privacy dividers framed in white steel. The included 3-drawer pedestal sits on 50 mm nylon swivel casters, two of which lock for stable placement, and runs on 3-section full-extension steel ball-bearing slides rated for 50000 open-close cycles, with a central linked lock securing all drawers with a single key. ABS circular cable grommets feed cords to an under-desk cable tray, and adjustable leveling feet on each outer leg compensate for uneven floors. Curved knee cutouts provide 690 mm clearance and 600 mm width at the recess, centering leg room for extended seated comfort. Low semi-transparent dividers block direct line of sight between users to reduce distraction while preserving easy cross-seat communication, and the modular bracket-connected partition system supports layout reconfiguration as team needs shift. The mobile pedestal offers accessible storage for documents and supplies directly at each seating position. This workstation is suited for open-plan office staff zones, startup and co-working spaces, administrative departments, educational institution offices, small business back offices, call centers, and shared work zones, where it fits compact floor areas while delivering two fully functional work positions. The unit supports a 150 kg uniform static load per worktop, 15 kg per drawer, and 5 kg on the under-desk cable tray, with a scratch-resistant surface tested to 2N load over 300 cycles. When procuring, note that assembly requires 40 minutes per set, delivered across multiple cartons with a total packaged gross weight of 180 kg and 1 m³ packaging volume, allowing teams to plan for delivery access, on-site assembly time, and floor load capacity prior to installation.