The HAIBANG WS-CR4-L1200-PED 4-Person Cross-Shaped Office Cubicle Workstation is a purpose-built modular workspace solution designed to balance collaborative access and individual focus for team-based work environments. Its cross-shaped layout arranges four equal L-shaped workstations around a central shared core, creating a compact, symmetrical cluster that maximizes usable floor space without crowding individual users. Each station features a 1200mm long, 600mm deep work surface set at a 750mm ergonomic height, with 650mm of seated knee clearance to support comfortable posture throughout extended work shifts. The 1200mm tall partial-height dividers feature an aluminium alloy frame, with a fabric-wrapped lower panel and frosted translucent slat upper section that blocks direct line of sight between seated adjacent users to reduce distraction, while retaining enough visual openness to support easy team communication and supervisor visibility across the cluster. Constructed for long-term commercial use, the workstation’s worktops are made from 25mm high-density particleboard finished with abrasion-resistant melamine laminate and 2mm PVC edge banding, rated to support 91kg of static load per surface with a finish that withstands 2000 abrasion cycles and a 10-year structural service life. The support frame uses 1.2mm thick powder-coated cold-rolled steel fitted with adjustable leveling feet to accommodate uneven floor surfaces, connected via zinc-plated steel brackets and corrosion-resistant fasteners. 18mm thick white melamine-faced particleboard modesty panels line each station’s front edge, while included mobile pedestals feature an 18mm melamine-faced particleboard carcass, steel ball-bearing full-extension drawer slides, a central locking system for three drawers, 360-degree swivel casters, and an integrated anti-tilt mechanism for secure, flexible personal storage. Integrated cable management includes a central under-worktop cable tray, desktop grommets, and in-partition routing channels to keep power and data cords organized and out of sight. Pre-fitted connecting brackets allow straightforward reconfiguration to alternate cluster layouts as team needs evolve. This workstation is ideally suited for staff team zones in small to medium open-plan office areas, as well as call center and administrative department floors where a balance of individual focus and team connectivity is required. Each set ships in two cartons with a packaged gross weight of 120kg, with a standard assembly time of 40 minutes per unit, allowing for efficient deployment during office fit-outs. Procurement teams should note the 2830 x 2830 x 1200mm overall footprint to confirm adequate floor allocation for planned installation, and account for the modular design that supports future workspace reconfiguration without full replacement of existing components.