The 3-Person L-Shaped Modular Office Workstation Cluster with Dividers and Mobile Pedestals (model WS-L3-OGW-2700, unbranded) delivers a structured open-plan work solution that balances low-level privacy and collaborative accessibility. Visually, the cluster forms a contiguous L-shaped layout holding three individual workstations, finished with light oak work surfaces, silver anodized aluminum partition frames, and dual-tone privacy dividers with white slatted upper sections and solid sage green lower panels. Each single L-station features a 1500 x 1500 mm work surface set at a 750 mm desktop height, with 650 mm under-desk knee clearance height and 600 mm knee clearance width per station; 1200 mm tall privacy dividers sit between stations to separate individual work zones without blocking cross-team sightlines. The full cluster occupies a 4920 x 3180 x 1250 mm footprint, sized to fit standard open office grid density for three users. The workstation is constructed for durable daily use: worktops and structural panels use E0 grade melamine-faced particle board with 25 mm thick desktop panels, sealed with 2 mm thick matching hot-melt applied PVC edge banding. Partition frames use 1.2 mm wall thickness aluminum alloy profiles, joined with cam-lock and bolted panel connections that support reconfiguration for layout adjustments. Each station includes a mobile pedestal fitted with cold-rolled steel drawer slides, integrated key locks, aluminum U-pulls, and 50 mm diameter non-marking 360-degree swivel PU casters; steel hardware is used across all structural connections. Practical design details support long-term ergonomic and functional use: each desktop features a curved concave front edge at the knee opening to support natural seated posture, with under-desk steel cable trays and 80 mm surface grommets to separate power and data routing. Each mobile pedestal holds three lockable, fully removable drawers that can be repositioned flexibly under desks as needed. Single desktops support a 91 kg static load, with a 150 kg uniformly distributed top static load reference, while drawer slides carry a 50000 cycle rating and each caster supports a 45 kg load; work surfaces deliver 2000 cycles of abrasion resistance. The cluster is ideal for open plan office staff areas housing administrative teams, as well as small team work zones where dividers reduce visual distraction while supporting quick cross-station collaboration, with a recommended 1.13 ㎡ seated work area per user. For procurement, note the unit ships as one set across 2 cartons, with 40 minutes reference assembly time per set, 1 m³ reference packaging volume, and 180 kg packaged gross weight; the assembled cluster has a 480 kg total net weight. No additional tooling or specialized installation equipment is required for standard setup.