The WS-CRN1400-PNL is an unbranded two-person office workstation arranged as a 90 degree corner cluster. Two curved corner desks face outward from a shared central panel junction, giving each user a separate knee bay while maintaining a compact footprint. Light grey fabric or laminate privacy panels rise from the floor and divide adjacent users, with black trim around each screen module and a walnut-grain rear accent rail. White support cabinets form solid outer modesty cheeks and structural sides, complementing the black metal post-and-screen frame. Desk surfaces use 25 mm melamine-faced particleboard with 2 mm PVC edge banding in a matching walnut tone, presented with a finished top thickness of 50 mm. The support cabinet sides are 18 mm light grey melamine-faced panels with square exposed edges. Upper privacy screens combine a fabric-faced or laminated face with a composite core, while lower modesty panels use grey laminate or fabric-faced composite board with a black horizontal trim. Structural posts are black powder-coated steel or aluminium extrusions, fitted with threaded glides for leveling on uneven floors. Each main seat provides 680 mm of knee clearance height and 900 mm of width, with a 600 mm work depth suited to a monitor, keyboard, paperwork, and document trays. The static work-surface capacity is 100 kg per seat, with a 40 kg single-point load rating in the keyboard zone and 30 kg of lateral stability resistance at each vertical support panel. A single monitor up to 27 inches or two monitors up to 24 inches can be used per seat. An 80 mm round plastic grommet with a brushed silver cap at the rear corner allows monitor and power cables to drop into the panel cavity. Cables then route vertically behind lower modesty panels and horizontally through the rear rail zone, avoiding exposed floor trays. The system includes a cable tray with 120 mm depth. The divider screens block direct sightlines between users while retaining visibility above seated head height, and the panel surface provides 1.6 square meters of sound diffusion area per seat. This workstation fits open-plan administrative offices, call centers, shared service areas, back-office processing teams, and project-based bench planning. Additional straight or corner modules can connect at the vertical posts to create larger rows. The open knee bay leaves space for an optional mobile pedestal rather than a fixed drawer unit. Procurement teams should note the workstation seats two users, weighs 135 kg net, and has a reference assembly time of 40 minutes per set. Packaging information indicates one set across two cartons in the primary reference, with a separate gross-weight record listing 180 kg across four cartons and one cubic meter of volume; these details should be confirmed at order stage to match the actual shipment configuration.