纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3020 × 1530 × 1200 mm
Overall cluster dimensions	3020 x 1530 x 1200 mm
Work surface height	762 mm
Single work surface depth (straight leg)	610 mm
Work surface thickness	38 mm
Partition panel total height	1200 mm
Vented upper panel height	200 mm
Lower modesty panel height	650 mm
Mobile pedestal dimensions per station	400 x 500 x 654 mm
Caster diameter (pedestal)	50 mm
Knee clearance height under desktop	670 mm
Knee clearance width at curved inner corner	800 mm
Cable grommet diameter	60 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product weight (2-station cluster)	280 kg
Recommended static load per work surface	91 kg
Drawer static load per pedestal	25 kg
Recommended user capacity	2 people
Surface wear resistance	2000 cycles
Fabric panel sound dampening NRC	0.35
Caster rolling durability	20000 cycles
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface substrate	Particleboard core with thermally fused melamine laminate
Work surface edge banding	2 mm thick PVC edge banding
Partition panel lower/full covering	Polyester fabric upholstery over hardboard core
Partition upper vented section	Perforated steel mesh with silver powder-coated frame
Structural support frame	1.2 mm thick cold-rolled steel with epoxy powder coating
Mobile pedestal body	0.8 mm thick steel cabinet with matching laminate drawer front
Pedestal casters	Black nylon twin-wheel casters, two lockable per unit
Hardware fasteners	Zinc-plated steel screws and connection brackets
Modesty panel (desk underside)	Fabric-covered matching hardboard panel
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Mobile pedestal storage per station	2-drawer lockable unit with one utility drawer and one filing drawer
Cable management system	Desktop grommets and under-desk cable routing channels
Partition privacy function	1200 mm mid-height panels block seated line of sight between stations
Pedestal mobility function	Four casters per pedestal allow repositioning under desk or to adjacent work area
Modular assembly function	Bolt-together panel and frame system supports future reconfiguration of workstation layout
Curved inner corner design	Rounded front desktop edge provides increased forearm support during extended computer use
Work surface surface function	Stain, scratch, and impact resistant laminate finish suitable for daily office use
Partition acoustic dampening	Fabric-covered panels reduce reflected office noise between adjacent workstations
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office staff areas	Provides semi-private workspaces for administrative, finance, or operations teams
Small business office layouts	Compact 2-person cluster fits efficiently in limited floor space without permanent construction
Call center or customer service hubs	Mid-height partitions reduce cross-talk distraction while allowing supervisor visibility
Startup co-working spaces	Modular design supports flexible reconfiguration as team size changes
Recommended seating pairing	Standard adjustable swivel office chairs with 520 mm seat height
Recommended accessory pairing	Monitor arms, under-desk CPU holders, and desk lamps compatible with grommet cable ports

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables safety and strength requirements, applicable to work surface and frame performance
EN 1335-1:2020	Office furniture work chair dimensions reference for seated knee clearance design
EN 1022:2018	Furniture seating strength and durability reference for desk edge load validation
EN 13986:2004	Wood-based panels for structural use, applicable to work surface and partition board cores

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard for load, stability, and durability testing
ANSI/BIFMA X5.6-2022	Panel systems performance standard for cubicle partition strength and connection
ANSI/BIFMA X5.9-2019	Storage units performance standard for mobile pedestal drawer load and durability

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to laminate desk surfaces and panel components
GB/T 3325-2017	General technical requirements for metal furniture, applicable to steel frames and pedestal cabinets
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applicable to board substrates
GB/T 11718-2021	Medium density fiberboard/particleboard performance requirements, applicable to desk core material

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to laminate desk surfaces and panel components；
2. GB/T 3325-2017：General technical requirements for metal furniture, applicable to steel frames and pedestal cabinets；
3. GB 18584-2001：Indoor decoration material limit of harmful substances for wooden furniture, applicable to board substrates；
4. GB/T 11718-2021：Medium density fiberboard/particleboard performance requirements, applicable to desk core material；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-2P-LC-1200

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-2P-LC-1200

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-2P-LC-1200打开导出工具

页面快速操作

发布采购询价

产品描述

The 2-Person Curved Corner L-Shaped Cubicle Workstation with Mobile Pedestals (model CUB-2P-LC-120) is a modular, semi-private cluster office solution designed for flexible open-plan and compact office environments, sold under an unbranded label. Its visual layout features a smooth curved inner corner that connects two adjacent L-shaped work zones, framed by uniform 1200 mm mid-height partitions that create defined personal workspaces without fully closing off sight lines across the office. The upper 200 mm of each partition uses perforated silver powder-coated steel mesh for air flow, while the lower 650 mm is wrapped in soft polyester fabric over a hardboard core, matching the fabric modesty panel fitted beneath each work surface. All work surfaces are finished in durable thermally fused melamine laminate over particleboard, edged with 2 mm thick PVC banding, with a rounded front edge along the curved corner to support forearms during long periods of computer work. The entire structure is supported by 1.2 mm thick cold-rolled steel frames with epoxy powder coating, held together with zinc-plated steel fasteners for rigid, long-lasting stability. Each workstation is paired with a matching mobile pedestal built from 0.8 mm thick steel, with a laminate drawer front and four black nylon twin-wheel casters, two of which lock for secure positioning. Each pedestal holds one utility drawer and one lockable filing drawer, designed to move smoothly under the desk or to adjacent work areas as needed. Built-in cable management includes desktop grommets and under-desk routing channels to keep power and data cords organized and out of sight. The 1200 mm partition height blocks seated line of sight between users, and the fabric panel covering delivers measured sound dampening to reduce cross-talk distraction, while still allowing supervisors to view work areas from a standing position. The laminate work surface resists stains, scratches, and impact for daily office use, with a rated static load capacity per surface of 91 kg, and each pedestal drawer supports 25 kg of static load. The system’s bolt-together modular design supports future layout reconfiguration without full replacement, making it suitable for open plan administrative, finance, and operations team areas, small business offices with limited floor space, call center and customer service hubs, and startup co-working spaces that require adaptable layouts. It pairs with standard adjustable swivel office chairs with 520 mm seat height, plus compatible accessories including monitor arms, under-desk CPU holders, and grommet-mounted desk lamps. For procurement, note that each set ships in two cartons, requires 40 minutes of assembly time, and pairs with no permanent construction modifications for installation, with a total assembled cluster weight of 280 kg.

2-Person Curved Corner L-Shaped Cubicle Workstation with Mobile Pedestals Specifications

供应商与现货