纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 700 × 1100 mm
Desktop working height	750 mm
Single work surface per seat	1200 x 600 mm
Desktop panel thickness	25 mm
PVC edge band thickness	2 mm
Divider partition height above desktop	350 mm
Knee clearance height under desktop	650 mm
Knee clearance width per seat	700 mm
Fixed 3-drawer pedestal dimensions	400 x 500 x 650 mm
Rolling CPU tray dimensions	250 x 500 x 120 mm
Cable grommet diameter	60 mm
Steel frame tube wall thickness	1.2 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static vertical load per desktop	100 kg
Single drawer static load capacity	25 kg
Drawer slide cycle durability	50000 open/close cycles
Surface abrasion resistance	2000 cycles
Net weight per workstation	99 kg
Recommended user capacity	2 seated office staff
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25mm melamine-faced MFC particleboard, light oak wood grain finish
Edge banding	2mm PVC edge trim on all exposed panel edges
Support frame	Powder-coated white steel square tube frame and divider rails
Divider panels	Upper translucent clear screen, lower light wood modesty panel, white metal trim
Drawer fronts	Light grey melamine-faced engineered board, white curved metal pulls
Drawer hardware	Cold-rolled steel ball-bearing full-extension drawer slides
CPU tray components	Melamine-faced board tray, four black nylon swivel casters
Modesty panels	18mm melamine-faced engineered wood matching worktop finish
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cable management	One 60mm diameter cable grommet per desktop, positioned at rear corner of each work surface
Storage configuration	One fixed integrated 3-drawer pedestal per seat, with two small stationery drawers and one large file drawer
CPU storage	Pull-out rolling wheeled CPU tray mounted under desktop behind each knee well, slides out for equipment access
Privacy separation	Framed dividers between adjacent seats and at workstation ends, providing visual separation between work zones
Assembly structure	Knock-down flat-pack construction with cam-lock and bolt fasteners for on-site assembly
Drawer operation	Smooth ball-bearing slide action, drawers extend fully to access rear stored contents
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office areas	Suitable for general staff work zones, providing separated personal workspaces in shared floors
Call center environments	Ideal for high-density seated staff positions with integrated storage and computer support
Administrative/financial departments	Integrated drawer pedestals provide secure personal storage for documents and office supplies
Small office fit-outs	Compact linear 2-person unit fits in tight spaces without requiring custom cubicle installation
Recommended configuration	Pair with ergonomic office task chairs, monitor arms and under-desk cable trays for full workstations

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables safety, strength and durability requirements, applicable for structural load testing
EN 527-2:2002	Office work tables safety, strength and durability test methods, applicable for cyclic load verification
EN 12521:2015	Furniture strength, durability and safety requirements for non-domestic seating area tables

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products standard for safety, durability and structural performance, applicable for commercial grade rating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for panel desk structural quality
GB/T 3327-2020	Test methods for surface physicochemical properties of furniture, applicable for melamine finish durability
GB/T 24821-2009	Office desks and chairs classification and dimensions, applicable for work surface height and clearance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for panel desk structural quality；
2. GB/T 3327-2020：Test methods for surface physicochemical properties of furniture, applicable for melamine finish durability；
3. GB/T 24821-2009：Office desks and chairs classification and dimensions, applicable for work surface height and clearance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-2P-LIN-2470-1100

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-2P-LIN-2470-1100

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-2P-LIN-2470-1100打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Person Linear Office Workstation with Dividers, Drawer Pedestals and CPU Trays is a modular partitioned commercial office desk featuring a modern design with a light wood finish and white metal framing. Its linear layout positions two individual workstations side by side, separated by framed dividers between adjacent seats and at the unit ends to create distinct, visually separated work zones. Each divider combines an upper translucent clear screen and lower light wood modesty panel trimmed with white metal, rising above the desktop to support personal focus without blocking ambient light in shared spaces. The unit uses knock-down flat-pack construction assembled on site with cam-lock and bolt fasteners. Its 25mm thick melamine-faced MFC particleboard work surface carries a light oak wood grain finish, with 2mm PVC edge banding protecting all exposed panel edges from wear. The support structure consists of powder-coated white steel square tube framing and divider rails, paired with matching 18mm melamine-faced engineered wood modesty panels. Each seat includes a fixed integrated 3-drawer pedestal with light grey melamine fronts and white curved metal pulls, fitted with cold-rolled steel ball-bearing full-extension slides for smooth, complete access to rear stored contents; two small drawers hold stationery, while one large drawer accommodates files. A pull-out rolling CPU tray mounted under each desktop behind the knee well uses black nylon swivel casters for easy equipment access. A 60mm diameter cable grommet sits at the rear corner of each work surface to route power and data cables. The workstation supports two seated staff, with each work surface offering a 1200mm by 600mm usable area at a 750mm working height, paired with ample knee clearance for comfortable seating. It is well suited for open-plan office general staff zones, high-density call center seating, administrative and financial department work areas, and small office fit-outs where compact, non-custom workspace solutions are needed. For procurement, note the unit ships in multiple cartons, requires 40 minutes of on-site assembly per set, and is designed to pair with ergonomic task chairs, monitor arms, and additional under-desk cable management accessories for a complete setup. Each desktop supports a 100kg static vertical load, with a 150kg maximum uniformly distributed top load, each drawer holds 25kg, and the CPU tray supports 10kg of equipment.

Two-Person Linear Office Workstation with Dividers, Drawer Pedestals and CPU Trays Specifications

供应商与现货