| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| 3-seater sofa overall dimensions | 2400 x 950 x 900 mm | |
|---|---|---|
| Single armchair overall dimensions | 1200 x 950 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth per seating position | 600 mm | |
| Backrest height above seat | 450 mm | |
| Armrest height above floor | 620 mm | |
| Armrest width | 180 mm | |
| Seat cushion thickness | 150 mm | |
| Backrest cushion thickness | 120 mm | |
| Decorative throw pillow dimensions | 450 x 450 mm | |
| Wood trim width | 50 mm | |
| Floor clearance under sofa base | 20 mm | |
| Full 3-seater sofa overall dimensions | 2400 x 950 x 900 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| 3-seater sofa net weight | 145 kg | |
|---|---|---|
| Per-seat static load capacity | 160 kg | |
| Total seating capacity for full set | 5 seats | |
| Foam density (seat cushions) | 45 kg/m³ | |
| Foam density (backrests) | 35 kg/m³ | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Recommended surface abrasion resistance (upholstery) | 50000 Martindale cycles | |
| Structural frame service life | 10 years | |
| Total occupant capacity for full set | 4 seats | |
| Seat cushion foam density | 45 kg/m³ |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| External upholstery | Cream top-grain leather match (genuine leather on contact surfaces, matching PU on side/back panels) | |
|---|---|---|
| Accent trim | Polished solid walnut-toned hardwood | |
| Internal frame | 40mm thick kiln-dried hardwood with reinforced corner blocking | |
| Seat support system | 8mm thick sinuous steel springs with polypropylene webbing layer | |
| Cushion filling | High resilience polyurethane foam with 20mm down wrap top layer | |
| Throw pillows | Stitched leather match covers with polyfiber fill | |
| Base plinth feet | Matching solid wood low-profile feet | |
| Upholstery surface finish | Light protective matte topcoat | |
| Frame joint hardware | Zinc-plated steel screws and corner brackets | |
| Contact surface upholstery | Cream top-grain leather match with 1.2mm thickness, with matching PU on non-contact side and back panels | |
| Accent trim components | Polished walnut-toned solid hardwood with clear matte lacquer finish | |
| Internal load-bearing frame | 40mm thick kiln-dried hardwood with double dowel reinforced corner blocking |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating configuration | Fixed 3-piece modular arrangement: 1 three-seat sofa + 2 matching single armchairs | |
|---|---|---|
| Cushion design | Fixed semi-attached seat and back cushions | |
| Posture support | Upright ergonomic back angle of 105 degrees from seat | |
| Armrest function | Fully padded wide armrests with solid wood edge trim | |
| Decor elements | Included matching stitched throw pillows: 2 brown per 3-seater, 1 cream center pillow on 3-seater, 1 brown per single chair | |
| Base design | Low-profile enclosed plinth base with solid wood perimeter trim | |
| Upholstery performance | Stain-resistant treated upholstery surface | |
| Set layout compatibility | Symmetric arrangement suitable for centered placement facing reception points or entryways | |
| Set configuration | Fixed 3-piece arrangement: 1 two-seat central sofa + 2 matching single armchairs | |
| Cushion attachment | Semi-attached seat and back cushions secured with hidden hook-and-loop fasteners | |
| Backrest posture angle | Fixed 105 degree angle from seat surface | |
| Armrest construction | Fully padded wide armrests with solid wood impact-resistant edge trim |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Total packaged units per set | 5 packages | |
|---|---|---|
| Largest carton dimensions (3-seater frame) | 2450 x 980 x 650 mm | |
| Single chair carton dimensions | 1250 x 980 x 650 mm | |
| Total gross weight per full set | 330 kg | |
| Total CBM per full set | 4.8 m³ | |
| On-site assembly time | 60 minutes | |
| 40HQ container loading capacity | 28 sets | |
| Interior packaging protection | 50mm thick EPE foam wrap, corner hardboard protectors, plastic moisture barrier, double-wall corrugated cardboard | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Hotel lobbies and reception halls | Formal symmetric design with premium wood and cream upholstery creates a professional welcoming first impression for upscale hotel properties | |
|---|---|---|
| Corporate executive reception areas | Conservative executive styling matches premium office environments for greeting clients and visiting executives | |
| Government and institutional waiting areas | Durable commercial construction and formal aesthetic meets requirements for public sector formal reception spaces | |
| VIP lounge spaces | Thick cushioning and wide armrests provide comfortable waiting for VIP guests in airport, club or premium service facilities | |
| High-end residential formal living rooms | Balanced 1+2+1 layout suits large formal living spaces in luxury villas or upscale residential developments | |
| Recommended companion furniture | Pair with matching marble or wood coffee tables of 700mm height, centered between seating units to complete the reception layout | |
| Upscale hotel lobbies and reception halls | Formal symmetric design with wood and cream upholstery creates a professional first impression for high-end hotel properties, scaled for large high-ceiling lobby spaces | |
| Government and institutional formal waiting areas | Durable commercial construction and understated aesthetic meets public sector formal reception requirements, with stain-resistant materials suitable for continuous daily use |
欧洲市场准入与化学品要求
| EN 12520:2015 | Furniture - strength, durability and safety - requirements for domestic seating, applicable performance baseline for non-domestic reception adaptation | |
|---|---|---|
| EN 1021-1:2014 | Furniture - assessment of ignitability of upholstered furniture - ignition source smouldering cigarette, minimum fire safety requirement for public space furniture | |
| EN 1021-2:2014 | Furniture - assessment of ignitability of upholstered furniture - ignition source match flame equivalent, minimum fire safety for commercial lobby installations |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the wood frame and solid wood trim components of this sofa set | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required formaldehyde emission limit <0.124mg/m³ for indoor public space use | |
| GB/T 1952.1-2012 | Soft furniture - sofa, applicable structural safety, durability and performance testing standard for upholstered seating products | |
| GB 20400-2006 | Leather and fur - limit of harmful matter, applicable to leather upholstery components for public indoor environments |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to the wood frame and solid wood trim components of this sofa set； 2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required formaldehyde emission limit <0.124mg/m³ for indoor public space use； 3. GB/T 1952.1-2012：Soft furniture - sofa, applicable structural safety, durability and performance testing standard for upholstered seating products； 4. GB 20400-2006：Leather and fur - limit of harmful matter, applicable to leather upholstery components for public indoor environments； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具This executive reception sofa set presents a polished, formal three-piece configuration built around a central sofa flanked by two matching single armchairs, arranged in a symmetric 1+2+1 layout designed for balanced, welcoming presentation. Soft cream upholstery is framed by polished walnut-toned solid wood trim that traces arm edges, base perimeters and geometric corner details, finished with a clear matte lacquer for refined depth. Wide, fully padded armrests sit at a comfortable resting height, trimmed with the same solid wood to resist scuff damage from bags and frequent contact. Low-profile enclosed plinth bases create a streamlined, leg-free silhouette, while coordinated stitched square throw pillows in complementary cream and brown tones are positioned for consistent, tailored visual appeal across all units. Each seating piece is built on a kiln-dried hardwood internal frame with reinforced corner blocking and zinc-plated steel hardware, supported by sinuous steel springs and polypropylene webbing for stable, even cushion performance. Upholstery uses cream leather match, with genuine leather on user contact surfaces and coordinating PU on non-contact side and back panels, treated with a light protective matte topcoat for stain resistance and easy routine cleaning. High-resilience polyurethane foam fills both seat and back cushions, with seat foam formulated to retain shape through repeated use, and back foam calibrated for medium-firm supportive comfort. Semi-attached cushions secured with hidden fasteners prevent shifting while preserving a clean, custom fit. The fixed 105-degree backrest angle supports upright, comfortable posture appropriate for short waiting periods and guest interactions. This set is well suited for upscale hotel lobbies, corporate executive reception areas, formal government and institutional waiting spaces, premium VIP lounges, and high-end residential formal living rooms, with a neutral palette that coordinates seamlessly with marble, stone and wood interior finishes. It pairs naturally with matching marble or solid wood coffee tables centered between seating units to complete a cohesive reception layout. For procurement, teams should confirm final bill of materials details including exact upholstery composition and foam density with suppliers prior to order placement. Shipping and assembly planning should account for multi-package delivery, with standard protective packaging to safeguard upholstered surfaces and wood trim during transit; on-site setup requires only foot attachment, cushion placement and unit alignment, with no complex frame construction required. Loading plans for bulk orders can be calculated against standard 40-foot high cube container capacities for efficient project fulfillment.
关注我们