| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Three-seat sofa overall dimensions | 1900 x 850 x 900 mm | |
|---|---|---|
| Single armchair overall dimensions | 900 x 850 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth (three-seat sofa, per position) | 550 mm | |
| Seat depth (single armchair) | 550 mm | |
| Backrest height above seat | 450 mm | |
| Armrest height from floor | 620 mm | |
| Armrest width | 120 mm | |
| Clearance under sofa base | 30 mm | |
| Wood accent trim dimensions | 80 x 50 mm cross-section | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Total set weight | 165 kg | |
|---|---|---|
| Seat static load capacity per position | 150 kg | |
| Recommended total seating capacity | 5 people | |
| Cushion compression set rating | 10% after 50,000 cycle tests | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Standard commercial warranty | 3 years | |
| Maximum rated seating occupancy | 5 people | |
| Cushion compression set performance | 10% after 50000 cyclic load tests | |
| Seam strength rating | 600 N tensile strength | |
| Frame fatigue resistance | 100000 simulated seating cycles without structural failure |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Outer upholstery | Cream matte faux leather (PU) | |
|---|---|---|
| Seat cushion core | 40 kg/m³ density high-resilience polyurethane foam | |
| Back cushion core | 30 kg/m³ density soft polyurethane foam | |
| Seat cushion thickness | 120 mm | |
| Back cushion thickness | 100 mm | |
| Arm accent trim | Dark walnut-stained solid hardwood | |
| Inner load-bearing frame | 30 mm x 50 mm kiln-dried solid hardwood | |
| Lower base trim | Black hard PVC edge banding | |
| Upholstery stitching | Polyester bonded thread with 8 stitches per inch | |
| Frame joint reinforcement | Metal corner brackets at all seat and back joints | |
| Contact surface upholstery | Cream matte PU faux leather, 0.8 mm thickness | |
| Seat cushion core material | 40 kg/m³ density high-resilience polyurethane foam, 120 mm thickness |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating configuration | Fixed stationary three-piece set, no recline or swivel mechanisms | |
|---|---|---|
| Cushion design | Tight attached seat and back cushions | |
| Arm support design | Rolled curved arms with wood structural accents | |
| Back support feature | Contoured lumbar support integrated into back cushion | |
| Floor protection | Integrated black non-marking base trim | |
| Layout flexibility | Individual standalone units allow flexible arrangement | |
| Cleaning accessibility | 30 mm base clearance allows standard vacuum and mop access under units | |
| Base seating configuration | Fixed stationary 3-piece set with no recline, swivel or rocking mechanisms | |
| Cushion attachment design | Tight, permanently attached seat and back cushions | |
| Armrest structural design | Fully padded rolled curved arms with exposed wood accent trim at front vertical supports | |
| Floor contact protection | Integrated black non-marking PVC base strip along full bottom perimeter | |
| Layout arrangement flexibility | 3 standalone units allow linear, conversational or L-shaped arrangement |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages | 3 units | |
|---|---|---|
| Three-seat sofa shipping carton dimensions | 1950 x 900 x 750 mm | |
| Single armchair shipping carton dimensions (per unit) | 950 x 900 x 750 mm | |
| Total shipping gross weight | 195 kg | |
| Total shipping volume | 2.6 CBM | |
| On-site assembly time | 20 minutes | |
| 40ft HQ container loading quantity | 52 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
推荐空间 / 目标用户 / 使用方式
| Corporate office reception areas | Formal styling and durable upholstery suitable for front-of-house guest waiting areas in professional office environments | |
|---|---|---|
| Government and institutional meeting spaces | Conservative cream and wood-trim design appropriate for official meeting rooms, visitor waiting rooms, and public service offices | |
| Small business lobby areas | Compact three-piece configuration fits lobbies of 15 sqm or larger, providing dedicated guest seating without excessive space use | |
| Executive office visitor seating | Matching formal styling complements traditional executive desks, suitable for placing opposite executive desks for guest meetings | |
| Hotel and hospitality waiting zones | Stain-resistant faux leather upholstery is suitable for low-to-medium traffic hotel business centers and lounge waiting areas | |
| Medical and clinic waiting areas | Smooth non-porous upholstery allows easy disinfection, suitable for private clinic or administrative hospital waiting spaces | |
| Corporate office front reception areas | Formal neutral styling and durable upholstery are suitable for front-of-house guest waiting areas in corporate office environments, projecting a professional image for visitors | |
| Government and institutional visitor spaces | Conservative cream and dark wood trim design is appropriate for official meeting room waiting areas, public service lobby spaces, and institutional reception zones |
欧洲市场准入与化学品要求
| EN 1335-2:2018 Office furniture - Office work chair - Part 2: Safety requirements | Reference safety standard for structural stability and load requirements applicable to non-task reception seating | |
|---|---|---|
| EN 1021-1:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | Recommended minimum flame resistance standard for public area upholstered seating | |
| EN 1021-2:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent | Recommended flame resistance standard for commercial office reception furniture | |
| EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | Reference standard for structural stability, static load and fatigue performance requirements for commercial public area seating |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for wooden frame and wood trim structural strength, dimensional stability, and finish durability requirements | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable for formaldehyde emission limits from wood components, required for indoor office use | |
| GB/T 27717-2011 Upholstered furniture for public places | Applicable for flame retardancy, structural strength, and durability requirements for high-traffic public reception seating | |
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applicable for harmful substance limits if genuine leather is used, or PU leather coating compliance for indoor use |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applicable for wooden frame and wood trim structural strength, dimensional stability, and finish durability requirements； 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applicable for formaldehyde emission limits from wood components, required for indoor office use； 3. GB/T 27717-2011 Upholstered furniture for public places：Applicable for flame retardancy, structural strength, and durability requirements for high-traffic public reception seating； 4. GB 20400-2006 Leather and fur - Limit of harmful matter：Applicable for harmful substance limits if genuine leather is used, or PU leather coating compliance for indoor use； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具This 3-piece cream upholstered reception seating set comprises one three-seat sofa and two matching armchrs, designed for polished, formal guest seating across commercial and select residential spaces. Visually, the set balances soft, neutral cream upholstery with structured dark stned solid wood arm trim and a slim black base perimeter, creating a timeless, professional silhouette that avoids overly casual styling. Rolled, fully padded curved arms add soft visual flow, while the wood accent trim at front arm supports introduces subtle textural contrast for a refined, approachable aesthetic. Constructed for regular high-traffic use, the set features a solid wood inner frame reinforced with metal corner brackets at all seat and back joints, secured with glued and stapled connections for long-term structural stability. All seating surfaces are upholstered in smooth, matte cream PU faux leather, with padded high-resilience foam seat cushions and softer foam back cushions that integrate contoured lumbar support for upright, comfortable seating. The dark solid wood arm trim adds both decorative detl and structural reinforcement at high-wear corners, while the black hard PVC base trim runs the full bottom perimeter of each unit to protect agnst abrasion. Cushions are permanently attached to prevent shifting during use, eliminating the need for frequent repositioning during cleaning. The set supports a formal seating capacity of five people, with three dedicated positions on the central sofa and one per armchr to avoid overcrowding. The three standalone units offer flexible layout options, supporting linear, L-shaped, or face-to-face conversational arrangements to suit different space dimensions. A 30mm clearance beneath the base allows full access for standard vacuum and mop cleaning without moving the heavy units, and the integrated non-marking base trim prevents scuffing to hard flooring surfaces without requiring separate floor glides. The set has no moving recline, swivel, or rocking mechanisms, reducing long-term mntenance needs. This set is well suited for corporate office front reception areas, government and institutional visitor wting spaces, small business lobbies, executive office guest seating, hotel business center wting zones, and private clinic or administrative hospital wting areas. Its stn-resistant, non-porous upholstery supports easy routine cleaning and disinfection, while its neutral styling complements both traditional and contemporary professional interiors. For procurement, teams should note that the set is unbranded, and exact material specifications including upholstery grade and foam density require supplier bill of materials confirmation prior to final order placement. Freight planning should account for individual packaging for each seating unit, with short on-site assembly time if units ship partially knocked down, or no assembly required if shipped fully assembled. The set carries a standard 3-year limited commercial warranty covering frame, upholstery, and cushion integrity, aligned with mid-grade commercial seating performance standards for high-traffic public use.
关注我们