The Light Grey Upholstered Swivel Lounge Armchair with Brushed Gold Plinth Base, model SLA-CURV-950G, features a streamlined curved silhouette defined by a continuous asymmetrical wrap-around back that flows seamlessly into integrated armrests. Its 360-degree fully upholstered exterior presents a consistent, polished appearance from every angle, supported by a low-profile brushed gold plinth base that sits flush to the floor for a sleek, modern aesthetic. Overall dimensions measure 950 x 900 x 790 mm, with a 483 mm seat height, 610 mm seat width, 749 mm seat depth, 76 mm armrest height above the seat, and 305 mm backrest height above the seat; the round plinth base has a 711 mm diameter and 76 mm height. Constructed for long-term durability, the chair’s internal load-bearing structure uses 18mm thick kiln-dried plywood with reinforced corner blocking, paired with a 14 mm bent plywood seat support board. The seat support system relies on 8-gauge sinuous steel springs with polypropylene webbing, topped with high-density polyurethane foam wrapped in 200g Dacron batting; seat foam density is 40 kg/m³ with a 60% rebound rate. The outer upholstery is 0.8mm thick light grey woven performance polyester blend, stitched with bonded nylon thread at 8mm seam pitch, and rated for 30000 double rubs of abrasion resistance. The 2mm thick cold-rolled steel plinth base has a brushed gold finish, fitted with a powder-coated steel ball-bearing swivel plate rated for 20000 rotations, and felt pads on the underside to protect flooring. The chair has a net weight of 35 kg and a static seat load capacity of 181 kg. The chair delivers smooth 360-degree swivel movement with no manual recline or tilt adjustment, holding a fixed relaxed lounge seat angle. The seat cushion secures to the frame with hook-and-loop fasteners and is fully removable to enable targeted spot cleaning of the upholstery. There is no glide adjustment on the fixed plinth base. This chair is suitable for residential living rooms as standalone accent seating next to sofas or coffee tables, boutique hotel lobbies, office breakout spaces, premium waiting zones, and bedroom corners as a dedicated reading chair near windows or dressers. Its fully finished upholstery supports placement away from walls to act as a subtle room divider in open-concept spaces, and it pairs naturally with round nesting coffee tables, curved sofas, and light wood or metal accent furniture for cohesive design schemes, intended for adult users seeking relaxed, supportive lounge seating. For procurement, note each unit ships in 2 cartons with a total packaged gross weight of 23 kg, a total carton volume of 0.26 m³, and an 40-minute assembly time per set. A 20GP container can accommodate 135 sets at 85% space utilization. The product is unbranded, and is intended for indoor use.