The Curved Wrap-Around Upholstered Lounge Armchair with Black Metal Legs (model LAC-750VGN-WA, unbranded lounge chair) features a sleek modern contemporary silhouette defined by continuous integrated curved wrap-around armrests that extend seamlessly from the backrest to create an enveloping seating profile. Slim splayed matte black powder-coated steel legs angle outward to form a four-point stance 20% wider than the seat width, balancing the soft upholstered form with structured industrial contrast for a refined visual presence. Construction centers on an 18 mm thick solid pine inner frame reinforced with plywood panels, paired with a 14 mm bent plywood seat support board and 3.2 mm diameter sinuous spring suspension spaced 80 mm apart for consistent under-seat support. Upholstery uses 0.8 mm thick 100% teal polyester velvet, with a 130 mm thick seat cushion filled with 24 kg/m³ high-density polyurethane foam wrapped in soft polyester fiber delivering a 45% rebound rate. The backrest uses 40 mm thick medium-density foam, with armrests padded with 20 mm thick foam to deliver gentle lateral torso support. Each 12 mm diameter steel leg is fitted with a 5 mm thick non-slip rubber end cap. Overall dimensions measure 750 x 830 x 880 mm, with a 660 mm wide, 560 mm deep seat positioned 480 mm from the floor, a 450 mm tall backrest above the seat, and armrests set 210 mm above the seat surface. The chair holds a net weight of 23.5 kg, supports a 159 kg static load with 40 kg static load capacity per leg, and is rated for a maximum recommended user weight of 120 kg. Designed for fixed stationary use with no swivel or rocking mechanisms, the chair holds a relaxed 105° integrated backrest angle for casual lounge comfort. Rubber end caps prevent hard floor scratches and reduce movement noise, while the velvet surface cleans easily with a soft dry or lightly damp cloth, requiring users to avoid excess moisture exposure. Partial assembly is required, with users attaching four legs to the pre-built upholstered frame over a 40 minute assembly window. The chair fits seamlessly across residential and commercial spaces: it works as living room accent seating placed beside sofas or coffee tables for casual guest use, compact bedroom or walk-in closet occasional seating, boutique hotel guest room lounge seating, office reception and waiting area visitor seating, and co-working breakout space seating for short breaks or impromptu conversations; it pairs well with 2.4 m executive desks for adjacent lounge positioning. Procurement teams should note units ship as 1 set across 2 cartons, with packaged gross weight of 23 kg per set, total carton volume of 0.26 m³ per set, and 135 sets fitting in a 20GP container at 85% space utilization, with consistent 30 mm seam stitching pitch for uniform production quality.