商家入驻
首页 > 首页 > Lounge discussion sofa > BIS-SET-4CH-GLD-MBL-01

5-Piece Round Bistro Conversation Set with Two-Tone Barrel Accent Chairs Specifications

BIS-SET-4CH-GLD-MBL-01

代码:S9A9D3V1
获取供应商报价
2026-09-18 14:06人气: 3
参数纠错历史记录(所有访客可见)
纠错时间修改字段原参数修改后参数说明 / 状态
暂无参数纠错记录,发现错误可点击行末旗标提交

BIS-SET-4CH-GLD-MBL-01

1家生产中供应商 >>
PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

Overall set footprint (4 chairs arranged around table)1800 x 1800 mm
Table overall dimensions762 mm diameter x 730 mm H
Table base (pedestal foot) diameter450 mm
Table underside knee clearance680 mm
Single chair overall dimensions780 mm W x 750 mm D x 970 mm H
Chair seat height (from floor to seat top)480 mm
Chair seat usable dimensions520 mm W x 600 mm D
Chair back height above seat490 mm
Chair gold base trim width20 mm
Clearance between chair seat and table edge200 mm
Finished Seat Cushion Thickness90 mm
Backrest Padding Thickness70 mm
Lumbar Support Zone Height240 mm
Clear Width Between Armrests540 mm
PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

Total set net weight118 kg
Single chair static load capacity150 kg
Recommended seating capacity4 people
Tabletop surface abrasion resistance3000 cycles
Upholstery seam stitch pitch8 stitches per inch
Chair cushion foam density38 kg/m³
Table base anti-wobble static stability load20 kg lateral force
Seat Foam Density / Rebound Reference45 kg/m³ / 65%
Back Foam Density Reference38 kg/m³
Upholstery Thickness / Abrasion Reference1.4 mm / 50000 cycles
PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

Tabletop18mm thick MDF core with white faux marble printed laminate, waterproof scratch-resistant top coating
Table pedestal and base plate1.5mm thick iron tube with polished gold electroplated finish, weighted cast iron bottom plate
Chair outer lower upholsteryOrange matte leatherette (PU fabric) with stain-resistant wipe-clean surface
Chair upper back and arm upholsteryCream white linen-blend soft fabric
Chair cushion and back padding80mm thick high-density polyurethane foam with 10mm soft Dacron top layer
Chair internal frame25mm thick kiln-dried solid hardwood + 1.2mm steel support brackets
Chair decorative trim and base ring1.2mm thick stainless steel with polished gold PVD finish
Floor contact pads5mm thick non-slip felt pads fixed to all chair and table base bottom edges
Seat Internal Support Board Thickness14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness14 mm bent plywood/composite reinforced frame
Gas-lift Engineering SpecificationRecommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness2.5 mm cold-rolled steel
PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

Seating configuration4 symmetrically arranged enclosed barrel chairs with 360° unobstructed table access
Chair motionStationary fixed base design with no swivel or tilt mechanism
Chair back supportCurved wrap-around back and integrated armrests providing full upper body lateral support
Table surface useSuitable for beverage service, small decor display, and light casual work tasks
Assembly requirementKnock-down construction requiring attachment of table pedestal to top and chair base trim
Floor protectionNon-marking felt glides on all base contact points prevent hard floor scratches
Cleaning and maintenanceSmooth non-porous surfaces allow spot cleaning with damp soft cloth, no harsh chemical cleaners required
Recline Angle / Lock Reference125° with 3suggested lock positions
Tilt Tension User-weight RangeReference adjustment coverage 120 kg
Height Adjustment Stroke100 mm continuous travel
Rotation / Mobility Configuration360° swivel with 5-caster multidirectional movement
PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

Reference Package Count1 set / 2 cartons
Reference Assembly Time40 minutes per set
Reference Carton Dimensions850× 420× 720 mm
Reference Packaged Gross Weight23 kg/set
Reference Carton Volume0.26 m³/set
Indicative 20GP Loading135 sets at 85% space utilization
Indicative 40HQ Loading320 sets at 85% space utilization
PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

Office reception and waiting areasCompact 4-seat configuration supports casual visitor conversation without large space requirements
Hotel lobby and lounge cornersLuxury two-tone gold trim design matches modern boutique hospitality interior aesthetics
Residential living room conversation nooksSmall footprint fits near windows or open-plan lounge areas for small group seating
Cafe and casual co-working breakout spacesWipe-clean surfaces support frequent light use for coffee meetings and short work sessions
Balcony and enclosed sunroom seatingStable pedestal base and durable upholstery suit semi-outdoor sheltered environments
Exhibition and showroom display areasCoordinated 5-piece set creates curated styling points for commercial real estate showcases
Recommended Matching Desk Size2.4 m executive desk
Reference Daily Use Duration8 hours/day; confirm by ergonomic testing
STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015Strength, durability and safety requirements for domestic seating, applicable to accent chair structural performance
EN 15372:2016Safety, strength and durability requirements for domestic tables, applicable to bistro table structural stability
EN 1022:2019Furniture seating stability test method, applicable for stationary chair tip resistance verification
STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017Office seating performance standard (light commercial use reference), applicable for reception lounge seating durability
ANSI/BIFMA X5.5-2021Desk/table products performance standard (light commercial use reference), applicable for bistro table load testing
STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017General technical requirements for wooden furniture, applicable to MDF tabletop and hardwood chair frame structural safety
GB/T 16799-2008Performance requirements for polyurethane leather upholstery, applicable to orange PU outer chair fabric
GB 18584-2001Limit of harmful substances for wooden furniture interior materials, applicable for indoor air quality compliance
招标文件标准化描述文本
本产品须满足以下技术参数要求:
1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable to MDF tabletop and hardwood chair frame structural safety;
2. GB/T 16799-2008:Performance requirements for polyurethane leather upholstery, applicable to orange PU outer chair fabric;
3. GB 18584-2001:Limit of harmful substances for wooden furniture interior materials, applicable for indoor air quality compliance;
最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告,可选择公制或英制单位。

PDF · BIS-SET-4CH-GLD-MBL-01

完整参数 Excel

导出全部商品信息与参数模块,文件内容统一使用英文。

XLSX · BIS-SET-4CH-GLD-MBL-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BIS-SET-4CH-GLD-MBL-01打开导出工具

页面快速操作

发布采购询价

产品描述

This 5-piece round bistro conversation set includes one round tulip-pedestal side table and four enclosed barrel accent armchairs, defined by a sleek modern luxury aesthetic. Its visual design centers on a polished gold pedestal base paired with a crisp white faux marble tabletop, complemented by two-tone seating: warm orange matte leatherette covers the lower chair sections, while soft cream white linen-blend fabric wraps the upper back and integrated armrests. Slim polished gold metal trim traces each chair base, tying the coordinated palette together for a refined, curated look. When arranged symmetrically around the table, the set forms a balanced, accessible layout with 360-degree unobstructed access to the table surface, creating an intimate seating circle ideal for casual interaction. The set is built for durable, long-term use across residential and commercial settings. The table features an 18mm thick MDF core topped with waterproof, scratch-resistant white faux marble laminate, supported by a 1.5mm thick polished gold electroplated iron pedestal anchored to a weighted cast iron base plate. Each chair uses a kiln-dried solid hardwood internal frame reinforced with steel support brackets, fitted with 80mm thick high-density polyurethane foam cushions topped with a soft Dacron layer for consistent, comfortable support. Chair upholstery combines stain-resistant, wipe-clean leatherette for lower sections and soft linen-blend fabric for upper contact points, with decorative 1.2mm polished gold stainless steel trim at the base. Non-slip, non-marking felt pads line all floor contact points on both the table and chairs to prevent hard surface scratches. Practically, the set accommodates four people with fixed, stationary chair bases that offer no swivel or tilt movement, prioritizing stable seating. The curved wrap-around chair backs and integrated armrests deliver full upper body lateral support for relaxed lounging, while the table surface works well for beverage service, small decor display, and light casual work tasks. Spot cleaning with a damp soft cloth is sufficient for regular maintenance, as harsh chemical cleaners are not required for the smooth non-porous surfaces. The knock-down construction requires attaching the table pedestal to its top and securing chair base trim during assembly, a process that takes 40 minutes to complete. This set fits a wide range of spaces: compact office reception and waiting areas, boutique hotel lobby corners, residential living room window nooks, cafe and co-working breakout zones, sheltered semi-outdoor balconies and sunrooms, and commercial exhibition or real estate showroom displays. When procuring, note that the unit ships in two cartons, with fixed dimensional and weight profiles for freight planning, and that seating is designed for static loads aligned with the stated per-chair capacity.

参数纠错提交 - BIS-SET-4CH-GLD-MBL-01 · S9A9D3

修改错误参数(改动哪项就填哪项)

上传纠错凭证(产品实拍 / 规格书,选填)

最多 5 个文件,单个不超过 10MB;支持 JPG、PNG、WebP、PDF、Word、Excel。

错误说明与正确数据依据(必填)

联系方式(选填)

同类产品推荐

商品对比清单0