The Two-Drawer Mobile Locking Pedestal Filing Cabinet is a compact under-desk storage unit with a clean two-tone appearance. Its visible fronts, top, and wood-grain surfaces use a light oak-grain melamine finish, while the smooth side panel is finished in white. The cabinet follows a practical vertical layout: a shallow stationery drawer sits above a taller hanging-file drawer, with a black and silver three-position mechanical combination lock and turn knob centered on the upper front. The drawer fronts are flush light oak-grain panels with a 2 mm reveal, and the top has a 20 mm overhang with an eased edge. Its overall dimensions are 400 x 550 x 600 mm.\n\nConstruction is based on wood-based panels suited to general office use. The carcass uses 18 mm board with light oak melamine on visible fronts, the side panel is 18 mm thick with a flush corner joint, and the top panel is 25 mm thick. Drawer fronts are also 18 mm thick, while the rear closure is a 9 mm melamine or hardboard panel. Exposed work edges are protected by 2 mm ABS edge banding, helping the pedestal maintain a neat finish in active work areas. The drawers operate on side-mounted metal runners with a ball-bearing carriage, supporting smooth access to contents.\n\nFunctionally, the upper drawer provides 12 liters of capacity for stationery and smaller office items, while the lower file drawer accommodates hanging files with space for 50 A4 folders. The mechanical lock secures both drawers through a linked lock bar, making the pedestal suitable for storing personal or workplace documents when the space is shared. Four swivel twin-wheel casters allow the cabinet to be moved or repositioned beneath a desk without lifting a loaded unit. The stated static load capacity for the complete cabinet is 50 kg, including 15 kg for the top drawer, 30 kg for the lower file drawer, and 30 kg on the top surface. The cabinet has a net weight of 13.5 kg.\n\nThis mobile pedestal is well suited to open-plan offices, private workstations, co-working spaces, administrative rooms, and home studies where file storage must remain close at hand. Its restrained oak-grain and white finish can coordinate with light wood desks or neutral interiors, while the narrow footprint supports placement under standard desk surfaces.\n\nFor procurement, buyers should note that the unbranded model is UMP-2D-CL-400 and plan for assembly; the reference assembly time is 40 minutes per set. Packaging references indicate one set supplied across multiple cartons, with shipment details including two-carton or three-carton packaging descriptions depending on the logistics record. The stated packaged gross weight is 100 kg per set and the packaging volume is 0.65 cubic meters per set, so delivery access, receiving labor, and on-site storage before assembly should be confirmed in advance.