The Low-Height Double-Door Lockable Office Storage Cabinet, model LSC-2D-9040, is an unbranded freestanding public furniture piece designed with clean, minimalist lines suited to a range of professional and mixed-use spaces. Finished in a light gray matte electrostatic epoxy powder coating, the unit presents a streamlined, low-profile silhouette with rounded safety edges trimmed in matching powder-coated material. Its compact square form measures 900 mm wide, 400 mm deep, and 900 mm tall, supported by 30 mm zinc-plated steel levelling feet that sit flush beneath the 25 mm thick top surface. The two outward-swinging doors, each 440 mm wide with 20 mm double-wall reinforced construction, open 110 degrees to reveal full access to the interior, with concealed stainless steel pivot hinges that allow minor alignment adjustments during setup. Built for consistent daily use, the cabinet’s carcass uses 0.6 mm thick cold-rolled steel for side panels, a 0.4 mm thick steel back panel, and 0.8 mm thick adjustable interior shelves. Each shelf supports an 80 kg static load, with a 30 kg distributed load rating per shelf, while doors are rated to hold a maximum 10 kg of stored items each. A zinc alloy electronic combination lock with key override operates a central 2-point locking system to secure both doors, with hinges tested to 80000 open/close cycles. The included anti-tip wall anchor is rated for 100 kg load resistance to prevent forward tipping when the unit is fully loaded. Two adjustable shelves create three flexible internal storage zones sized to fit A4 folders, general office supplies, and small office equipment, while the levelling feet compensate for uneven floor surfaces to keep the unit stable. This cabinet works well positioned alongside workstations for accessible document and personal item storage, placed under elevated work surfaces for discrete under-counter storage, deployed in home offices to reduce clutter, staged behind reception desks to hold forms and visitor materials, or placed in break rooms to store disposable supplies, cleaning materials, and non-perishable goods. Procurement teams should note the unit ships as one set split across multiple cartons, with a total packaged gross weight of 100 kg and total packaging volume of 0.65 m³; assembly takes 40 minutes per unit, and no specialized installation expertise is required for standard setup.