The Two-Piece Round Nesting Coffee Table combines a sculptural pedestal form with a practical two-level serving layout. Its large 800 mm round top sits at 360 mm, while the 600 mm upper top sits at 450 mm, creating two independent display and serving surfaces. When extended, the set occupies a 900 by 900 by 450 mm footprint; when nested, the upper table slides over the lower table, reducing occupied width from 1200 mm to 900 mm. The upper table can also be moved manually around the lower drum through 360 degrees, with a required 50 mm minimum clearance between tops. Visual character is defined by glossy white marble-look surfaces, a dark fluted cylindrical base, and a curved brown accent panel set into one side. The two-tone pedestal and painted vertical slab support give the set a modern luxury presence suited to contemporary and art deco interiors. Each 15 mm top has an eased round edge and gray veining. The lower pedestal uses an 18 mm MDF or plywood drum, with 12 mm painted MDF or wood-composite ribs forming 8 mm deep vertical fluting. The brown panel is a 25 mm curved wood-composite component with wood-grain veneer or laminate wrap. The upper support is a 50 mm curved black painted wood-composite slab, reinforced by a 30 by 30 by 1.2 mm square steel tube frame and connected with eight M8 by 40 mm steel inserts and locking washers per top. The table supports trays, magazines, drinks, books, remote controls, lamps, and decorative objects across a combined 0.88 square meter surface. Rated distributed static loads are 50 kg on the lower table and 30 kg on the upper table. It accepts a 20 kg concentrated load over a 100 by 100 mm area for one hour, resists through-cracking from a 1.0 kg steel ball dropped from 150 mm, and remains stable with 15 kg placed 100 mm inside the top edge. The finish withstands 400 abrasion cycles under a 1 kg felt load without wear-through. Six polymer glide pads, each with a 20 mm contact diameter, protect flooring and create a 12 mm shadow gap. There are no casters, gas lifts, height adjustment, or powered mechanisms, making the design best for fixed placement. Suitable settings include living rooms facing sofas up to 3200 mm wide, small apartments, studios, hotel suites, serviced-apartment lounges, reception areas, model-home staging, and lounge-side or bedside arrangements. Procurement teams should note that this unbranded model, NRC-2P-WMB-FLB, ships as one set in two cartons with packaged dimensions of 2100 by 1100 by 300 mm, 90 kg gross weight, 0.55 cubic meter packaging volume, and a reference assembly time of 40 minutes.