This unbranded rectangular lift-top coffee table, model CT-LIFT-MARBLE-1200-RECT, presents a modern low-profile form with two distinct surface levels. Its primary black top has a glossy marble-look hard surface with white veining and rounded edges, while the rear section uses a glossy white stone-look panel with a black edge band. The walnut-tone wood-grain engineered-wood case is paired with a recessed black plinth, giving the piece a floating appearance. Flush-reveal drawer fronts, a vertical left cabinet door, and coordinated light gray or taupe open-drawer interiors contribute to a clean, structured look suited to contemporary living and lounge settings. Construction centers on 18 mm walnut-tone engineered-wood panels, a 45 mm finished top thickness, and an 80 mm main support section with a 2 mm metal wall. Side-mounted metal telescopic drawer slides offer full or three-quarter extension, while the lift action uses concealed metal arms with friction or spring-assisted positioning. The left cabinet door operates on a concealed side-mounted hinge. The table weighs 68 kg net and is supplied as one set in two cartons, with packaged gross weight of 90 kg, packaging dimensions of 2100 by 1100 by 300 mm, and packaging volume of 0.55 cubic meters. Reference assembly time is 40 minutes per set. Functionally, the rear white top rises 170 mm to a 620 mm working height for laptop use, writing, or dining from a sofa. The lower black surface remains at 450 mm for drinks, decor, or serving. Each main seating position has 680 mm of knee height and 900 mm of knee width, and the layout is recommended for four people. The front side-opening drawer provides 520 by 420 by 130 mm of space for books, magazines, and media accessories. A shallow right pull-out tray supports a keyboard, documents, laptop, or serving items, while the left hinged door opens to an enclosed cabinet with 0.08 cubic meter of storage. All three storage access points operate independently. An 80 mm cable opening with a 120 mm-deep tray helps manage cords when the raised top is used for work. The main top’s softened 60 mm-radius corners reduce impact risk near seating. Load capacities are 30 kg static on the lift top, 60 kg distributed on the main tabletop, 10 kg on the pull-out tray, and 8 kg per drawer. The table is suitable in front of a three-seat sofa in apartments or family rooms, in studio rooms where the raised surface serves as a temporary dining or work area, in office breakout spaces, reception lounges, and home media areas. Procurement planning should allow 700 mm of clearance on drawer sides for safe full-extension access and confirm site access, two-carton receiving, assembly time, and the 90 kg packaged weight before installation.