纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	540 × 490 × 870 mm
Seat height	450 mm
Seat cushion dimensions	480 x 440 x 50 mm
Backrest height above seat	420 mm
Armrest height above seat	220 mm
Frame tube diameter	22 mm
Vertical back slat count	4 pieces
Leg footprint width	500 mm
Lower stretcher height above floor	120 mm
Armrest span	520 mm
Seat cushion edge thickness	50 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static load capacity	227 kg
Net weight per unit	8 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Upholstery abrasion resistance	30000 cycles
Frame static load test load	136 kg
Seam stitch pitch	8 stitches per 30mm
Floor protection load rating per glide	80 kg
Recommended number of users	1 adult
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main frame	1.2mm thick carbon steel tube with matte dark bronze powder coating
Backrest slats	Solid 10mm wide carbon steel vertical bars welded to frame rails
Continuous armrests	Curved same-tube carbon steel extending from front leg to top back rail
Seat cushion inner board	9mm thick multilayer plywood support base
Cushion filling	High-resilience polyurethane foam wrapped in 200g polyester batting
Seat upholstery	1.0mm thick matte dark grey PU faux leather \| Visual dark grey padded surface, fabric type to confirm
Lower perimeter stretcher	Carbon steel tube welded to all four legs for structural rigidity
Floor glides	Injection-molded black nylon anti-scratch feet attached to leg bottoms
Welded joints	Full penetration TIG welds ground smooth prior to powder coating
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed seating structure	No tilt, swivel, lift or folding mechanisms, rigid welded frame
Armrest support	Continuous curved armrests provide forearm support during tea service or dining
Back support	Vertical slat back provides upright lumbar support for extended seated use
Stackable compatibility	Non-stackable fixed leg design for stable permanent placement
Seat cushion retention	Cushion secured to seat frame with hidden hook-and-loop fasteners
Floor protection	Nylon glides prevent hard metal legs from scratching wood or tile floors
Moisture resistance	Powder-coated frame resists minor spills for easy wipe cleaning \| Standard finish for light-commercial seating
Indoor use suitability	Designed for dry indoor tea room, dining and reception spaces \| Labeled explicitly as tea table chair
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Tea room application	Suitable for home or commercial tea rooms paired with standard height tea tables
Dining area application	Usable as dining armchair in residential kitchens, apartments or small restaurants
Reception area application	Suitable for office reception lounges, waiting areas or boutique cafe seating
Balcony leisure use	Appropriate for covered indoor balcony casual seating for reading or tea breaks
Target user group	Designed for adult users seeking stable upright seating with forearm support
Recommended configuration	Pair with matching light luxury metal frame tea table or 750mm height dining table
Commercial venue suitability	Ideal for tea houses, book cafes and boutique hotel guest room seating
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Applies to strength, durability and safety requirements for domestic and commercial seating
EN 1022:2018	Applies to stability testing for non-adjustable four-legged seating
EN 14184-1:2011	Applies to formaldehyde content testing for upholstery textile/PU materials

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applies to general technical requirements for metal furniture seating strength and stability
GB/T 24821-2009	Applies to performance requirements for upholstered dining chair cushion durability
GB 18584-2001	Applies to mandatory limit of harmful substances in wooden and metal indoor furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applies to general technical requirements for metal furniture seating strength and stability；
2. GB/T 24821-2009：Applies to performance requirements for upholstered dining chair cushion durability；
3. GB 18584-2001：Applies to mandatory limit of harmful substances in wooden and metal indoor furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · Y1072

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · Y1072

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · Y1072打开导出工具

页面快速操作

发布采购询价

产品描述

The Light Luxury Metal Frame Upholstered Tea Table Armchair Y1072 is an unbranded tea and dining armchair defined by a streamlined, refined silhouette that balances understated luxury with functional rigidity. Its visual layout features a continuous tubular frame that curves seamlessly from front legs up to form armrests, then extends to connect with the top back rail, creating a cohesive open structure. Four vertical solid slats form the backrest, paired with a thick, padded dark grey seat that offers a soft visual contrast to the dark bronze matte frame, presenting a polished, contemporary look suited to curated casual and semi-formal spaces. Construction prioritizes long-term structural stability and everyday durability. The core frame is built from carbon steel tube, finished with a matte dark bronze powder coating, with full penetration TIG welds ground smooth before coating to create clean, unobtrusive joints. Four vertical carbon steel back slats are welded directly to the frame rails, and a lower perimeter carbon steel stretcher connects all four legs to boost overall rigidity. The seat rests on a multilayer plywood support base, padded with high-resilience polyurethane foam wrapped in polyester batting, and upholstered in matte dark grey PU faux leather. Injection-molded black nylon glides are fitted to leg bases to prevent hard metal contact with flooring, and the cushioned seat is secured to the frame with hidden hook-and-loop fasteners to prevent shifting during use. The chair uses a fully fixed, rigid structure with no tilt, swivel, lift or folding mechanisms, engineered for stable, permanent placement rather than flexible reconfiguration. Continuous curved armrests offer consistent forearm support ideal for tea service or dining, while the vertical slat back delivers upright lumbar support suitable for extended seated periods. The powder-coated frame resists minor spills to allow simple wipe cleaning, and the nylon floor glides protect wood and tile surfaces from scratches. The fixed non-stackable leg design ensures steady positioning for regular use. This armchair is well suited to a range of residential and light commercial spaces. It works as dedicated seating for home or commercial tea rooms paired with matching standard-height tea tables, as dining seating in residential kitchens, apartments or small restaurants, as guest seating in office reception lounges, waiting areas or boutique cafes, and as casual leisure seating for covered indoor balconies for reading or relaxed breaks. It pairs cohesively with matching light luxury metal frame tea tables, or standard height dining tables. For procurement planning, note that each unit ships across two cartons, with a reference assembly time of 40 minutes per set. The fixed non-stackable design requires layout planning for permanent placement, and the light-commercial grade finish makes it appropriate for lower-traffic public-facing spaces as well as residential use. The upholstery material delivers robust abrasion resistance for regular daily use, and the recommended static load rating supports safe use for all adult users.

Light Luxury Metal Frame Upholstered Tea Table Armchair Y1072 Specifications

供应商与现货