基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 600 × 600 × 550 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Leg cross-section at floor | 45 mm square | |
| Leg splay offset from center | 120 mm | |
| Under-table clearance height | 520 mm | |
| Edge radius | 15 mm | |
| Foot pad diameter | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Tabletop static load capacity | 30 kg | |
|---|---|---|
| Product net weight | 12 kg | |
| Vertical stability tilt threshold | 15 degrees | |
| Surface scratch resistance (lacquer finish) | Class 2 | |
| Recommended warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Tabletop panel | Solid natural hardwood with visible oak grain, matte clear lacquer finish | |
|---|---|---|
| Support legs | Solid tapered hardwood, splayed outward, matched wood finish to tabletop | |
| Tabletop edge | Continuous rounded solid wood edge, no veneer edge banding | |
| Leg attachment hardware | Zinc-plated steel screw fasteners with pre-drilled mounting points | |
| Floor contact pads | Black non-slip rubber pads fitted to each leg base | |
| Surface coating | Low-VOC matte clear lacquer, water-resistant for damp cloth cleaning | |
| Leg-to-table joint | Reinforced mortise and screw hybrid connection | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Assembly method | Knockdown screw-fit leg attachment with included hex key, pre-drilled holes | |
|---|---|---|
| Floor protection | Rubber foot pads prevent hard floor scratching and reduce sliding | |
| Surface use | Smooth single-tier round top supports lamps, books, drinks or small decor | |
| Level adjustment | Fixed-height non-adjustable feet for even hard floor surfaces | |
| Edge safety | Rounded smooth edges eliminate sharp impact points for household use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Sofa side placement | Position next to living room sofas for holding drinks, remote controls and table lamps | |
|---|---|---|
| Bedside nightstand use | Place next to beds for holding phones, books and small bedtime items | |
| Lounge accent furniture | Use in reading nooks or lounge areas as a decorative functional surface | |
| Small balcony placement | Suitable for compact balcony spaces for holding plants and beverages | |
| Waiting area furnishing | Deploy in office reception or lounge waiting areas for guest convenience |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable for performance testing | |
|---|---|---|
| EN 71-3:2019 | Safety of furniture surface coating migration for household use |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wooden furniture |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001:Indoor decoration material limit of harmful substances in wooden furniture; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具