纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 600 × 480 mm
Tabletop thickness	25 mm
Lower shelf dimensions	800 x 400 mm
Lower shelf height from floor	200 mm
Under-table clearance below top surface	455 mm
Metal frame tube cross-section	40 x 20 mm
Frame wall thickness	1.5 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop distributed static load	68 kg
Lower shelf static load	30 kg
Product net weight	22 kg
Finish abrasion resistance	Grade 2, 2000 cycles
Floor contact static stability	Pass 10° tilt test
Recommended service life	5 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Frame structure	Carbon steel rectangular tube with welded joints
Frame finish	Matte black electrostatic powder coating
Tabletop panel	High-density particleboard core with matte black melamine laminate
Lower shelf panel	High-density particleboard core with matte black melamine laminate
Floor contact pads	Non-marking polyethylene glides
Hardware fasteners	Zinc-plated steel bolts and barrel nuts
Panel edge banding	1mm thick matte black PVC edge banding
Weld finish	Ground smooth welds at frame joints
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Primary tabletop surface	Flat level surface for placing drinks, decor, and reading materials
Lower offset shelf	Open auxiliary storage for magazines, remotes, or small decor items
Floor stability adjustment	Fixed polyethylene glides with no height adjustment
Assembly requirement	Knockdown assembly with included hex key and hardware
Cleaning maintenance	Wipe clean with damp soft cloth, no harsh abrasives
Mobility	Stationary design, no casters or lift mechanisms
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room	Placed in front of sofas for serving, decor, and everyday living room use
Small apartment spaces	Open frame design creates lightweight visual presence for compact living areas
Office lounge and waiting areas	Used in reception or break areas for guest refreshments and reading materials
Modern minimalist interiors	Geometric open frame and monochrome finish suit contemporary, industrial, and Nordic design schemes
Hard flooring surfaces	Non-marking glides prevent scuffs on wood, tile, and vinyl flooring

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Applies to safety, strength and durability requirements for domestic tables
EN 1022:2019	Applies to stability testing for domestic seating and tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applies to general technical requirements for wooden furniture for indoor use
GB/T 1730-2007	Applies to paint film hardness testing for metal furniture surfaces
GB/T 4893.8-2013	Applies to surface wear resistance testing for furniture panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applies to general technical requirements for wooden furniture for indoor use；
2. GB/T 1730-2007：Applies to paint film hardness testing for metal furniture surfaces；
3. GB/T 4893.8-2013：Applies to surface wear resistance testing for furniture panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-MB2T-1200

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-MB2T-1200

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-MB2T-1200打开导出工具

页面快速操作

发布采购询价

产品描述

The Matte Black Two-Tier Geometric Metal Frame Rectangular Coffee Table (model CT-MB2T-1200) is an unbranded coffee table defined by its clean, contemporary silhouette. Its open geometric sled frame creates a lightweight, uncluttered visual presence, with a rectangular upper tabletop and a smaller offset lower shelf arranged in a streamlined monochrome matte black finish that avoids visual heaviness even in compact spaces. The structure is built from carbon steel rectangular tube frames with ground smooth welded joints, finished with matte black electrostatic powder coating. Both the top surface and lower shelf use high-density particleboard cores clad in matte black melamine laminate, finished with 1mm thick matte black PVC edge banding; the primary panel core is 25mm thick, with a composite build-up on the load-bearing top for a finished top thickness of 45mm. Frame components connect with zinc-plated steel bolts and barrel nuts, and non-marking polyethylene glides line all floor contact points. The flat upper tabletop provides a stable level surface for placing drinks, decorative pieces, and reading materials, with an open under-top clearance that accommodates comfortable legroom for seated users. The offset lower open shelf offers auxiliary storage for magazines, remote controls, and small decor items, and integrated cable management supports organization of power and data cables. The table uses fixed glides with no height adjustment, has a stationary design without casters or lift mechanisms, and requires knockdown assembly with the included hex key and hardware. Routine maintenance only requires wiping with a damp soft cloth, as harsh abrasive cleaners are not recommended for the finish. This table works equally well in residential settings, positioned in front of sofas in living rooms or small apartment spaces where its open frame preserves visual spaciousness, and in commercial spaces including office lounges, reception waiting areas, and staff break zones. Its monochrome geometric design complements modern minimalist, industrial, and Nordic interior schemes, and its non-marking glides are safe for use on wood, tile, and vinyl hard flooring. When planning procurement, note that each unit ships across two cartons, with a reference assembly time of 40 minutes per set. The product carries a 5 year recommended service life, with defined static load capacities for both surfaces, and meets a 10° tilt stability standard for floor contact. Its abrasion-resistant finish supports regular daily use in high-traffic shared and private spaces.

Matte Black Two-Tier Geometric Metal Frame Rectangular Coffee Table Specifications

供应商与现货