纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	950 × 1800 × 780 mm
Tabletop thickness	50 mm
Under-apron knee clearance	660 mm
Leg cross-section	80 x 80 mm
Apron height	70 mm
Long-side intermediate leg spacing	900 mm
End clearance between corner legs	790 mm
Floor glide height	5 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static distributed tabletop load	136 kg
Seating capacity	6 persons
Net product weight	78 kg
Per-leg vertical static load rating	45 kg
Surface water resistance rating	Level 2, resistant to 24-hour cold water spills
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	Solid natural white oak planks, jointed for flat stability
Tabletop finish	Clear matte UV-cured lacquer, 0.15mm dry film thickness
Leg material	Solid square oak sections, matched grain to tabletop
Apron frame	Solid oak hardwood, connected with reinforced hardware joints
Floor glides	Non-marking high-density polyethylene pads
Joint connectors	Zinc-plated steel confirmat screws with dowel alignment
Wood moisture content	10%
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Table structure	Fixed non-extendable rectangular top, no leaf storage or expansion mechanism
Leg configuration	6 total legs: 4 at corners, 1 midpoint per long side for structural rigidity
Under-table access	Full open perimeter legroom with no central modesty panel or cross-bracing obstruction
Floor adjustment	Fixed non-adjustable glides, designed for level hard floor surfaces
Surface maintenance	Wipe-clean finish, resistant to common household food and beverage spills
Assembly type	Knock-down flat-pack assembly, legs and aprons attach to tabletop with included hardware
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Suitable for 6-person family meals and casual gatherings, standard dining height for chair compatibility
Open-plan kitchen dining area	Light natural finish complements modern minimalist and Nordic interior schemes
Small office breakout space	Durable solid wood surface suitable for casual meetings and employee meal areas
Cafe or casual restaurant seating	Stable 6-leg structure supports frequent daily commercial use
Studio apartment dining zone	Clean straight lines create visual lightness without excessive visual bulk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable load and stability requirements
EN 13722:2004	Furniture - Test methods for surface finishes, resistance to cold liquids and heat for dining surfaces

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-OAK-RECT-6S-SQLEG

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-OAK-RECT-6S-SQLEG

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-OAK-RECT-6S-SQLEG打开导出工具

页面快速操作

发布采购询价

产品描述

This Natural Light Wood Rectangular 6-Seater Dining Table with Square Legs is a fixed, minimalist modern dining piece designed for balanced visual appeal, durable performance and versatile placement across residential and light commercial spaces. Its form features clean, straight lines and a consistent light natural oak grain across the tabletop, square legs and apron frames, creating an open, uncluttered visual profile free of excessive bulk. The six square legs are positioned at four corners and one midpoint on each long side, delivering a fully open perimeter legroom area with no central modesty panel or cross-bracing to obstruct movement or seating. The table’s fixed non-extendable rectangular top is constructed from solid natural white oak planks, jointed to ensure long-term flat stability, with a clear matte UV-cured lacquer finish that preserves the wood’s natural texture. All structural components including legs, aprons and supporting frames use matching solid oak, connected with zinc-plated steel confirmat screws and dowel alignment for rigid, long-lasting joints. Non-marking high-density polyethylene floor glides protect hard floor surfaces without scuffing or marking, and the wood is dried to a 10% moisture content to reduce warping risk under normal indoor environmental conditions. The tabletop supports 150 kg of uniformly distributed static load, with per-leg vertical static load ratings of 45 kg, and the surface holds Level 2 water resistance, tolerating 24-hour cold water spills and common household food and beverage stains for easy wipe-clean maintenance. It is delivered as a knock-down flat-pack across two cartons, with all required hardware included for assembly completed in 40 minutes, and its fixed glides are engineered for placement on level hard floor surfaces. With standard dining height dimensions compatible with most market dining chairs, the table fits seamlessly into residential dining rooms for 6-person family meals and casual gatherings, open-plan kitchen dining areas paired with modern minimalist or Nordic interior schemes, small office breakout spaces for casual meetings and staff meals, casual cafes and restaurants for daily high-frequency use, and studio apartment dining zones where its streamlined form avoids overwhelming limited space. Procurement teams and buyers should note the product is unbranded, ships as a 90 kg packaged set across two cartons, offers no extendable mechanism or adjustable floor glides, and requires level installation surfaces to ensure stable, long-term use.

Natural Light Wood Rectangular 6-Seater Dining Table with Square Legs Specifications

供应商与现货