基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 1200 × 600 × 500 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Leg top section diameter | 45 mm | |
| Leg bottom section diameter | 30 mm | |
| Undertable clearance | 350 mm | |
| Corner radius | 30 mm | |
| Leg splay angle | 12 degrees | |
| Tabletop overhang | 40 mm | |
| Apron height | 120 mm | |
| Leg spacing (long side) | 1080 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Tabletop distributed static load | 50 kg | |
|---|---|---|
| Product net weight | 22 kg | |
| Point load capacity (per 100x100mm area) | 15 kg | |
| Leg lateral stability load | 30 kg | |
| Static load cycle rating | 10000 cycles | |
| Finish abrasion resistance | 400 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Tabletop | Solid natural oak/ rubberwood panels, matte NC lacquer finish | |
|---|---|---|
| Legs | Solid wood tapered splayed legs, matching tabletop finish | |
| Structural apron | Solid wood frame, hidden undertable apron connecting all four legs | |
| Connecting hardware | Zinc-plated steel bolts with threaded wood inserts | |
| Surface finish | Matte clear lacquer, 0.1mm dry film thickness | |
| Floor protection pads | 5mm thick felt pads affixed to leg bottoms | |
| Wood moisture content | 10% | |
| Adhesive | Low-VOC wood glue for panel joint assembly | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Assembly requirement | Knock-down leg attachment, 4 bolts per leg, no special tools required | |
|---|---|---|
| Surface use suitability | Flat smooth top supports beverage service, decor display, and everyday living room use | |
| Floor compatibility | Works on low-pile and shag rugs as well as hard flooring | |
| Cleaning access | 350mm undertable clearance allows robot vacuums and manual cleaning under frame | |
| Edge safety | Rounded 30mm corners reduce impact injury risk for households with children | |
| Stability mechanism | 12-degree outward splayed legs lower center of gravity to prevent tipping | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Number of packages | 1 | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Primary application | Residential living room placement in front of 3seat sofas | |
|---|---|---|
| Small space suitability | 1200mm length fits compact apartments and studio living areas | |
| Style matching | Coordinates with Scandinavian, minimalist, wabi-sabi and light wood interior schemes | |
| Commercial application | Suitable for hotel lounge areas, office break rooms, and waiting zones | |
| Recommended pairing | Works with fabric or leather sofas, shag or low-pile area rugs | |
| Use limitation | Intended for indoor dry environment use only, not rated for outdoor exposure |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
本产品须满足以下技术参数要求: 1. 技术标准与检测报告由供应商在投标或采购确认阶段提供; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具