纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 800 × 750 mm
Tabletop thickness	30 mm
Embedded tea control panel cutout size	370 x 200 mm
Pedestal base dimension (single)	500 x 400 x 720 mm
Knee clearance height under table	680 mm
Side overhang from pedestal edge	250 mm
Tabletop corner radius	10 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop static load capacity	300 kg
Integrated kettle heating power	1500 W
Integrated sterilizer heating power	700 W
Kettle liquid capacity	1.2 L
Sterilizer liquid capacity	0.8 L
Tabletop surface heat resistance	1200 °C
Surface abrasion resistance rating	4 grade
Electrical connector cycle life	60000 cycles
Seat capacity configuration	6 seats
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main tabletop	Black matte sintered stone with nano anti-stain coating
Pedestal bases	Polished black-and-white patterned natural marble block
Embedded tea tray panel	Black tempered glass control interface
Tea set drain fitting	Brass downspout connector
Chair structural frame	Gunmetal gray brushed stainless steel tubing
Chair seat upholstery	Off-white top-grain leather over high-density foam
Chair back support panel	Brushed stainless steel vertical upright
Table edge treatment	Mitered polished stone edge, no sharp corners
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Integrated auto water refill function	One-button control for automatic kettle top-up
Multi-temperature preset control	Three preset temperatures for different tea types: 85°C, 95°C, 100°C
Concealed drainage system	Hidden pipe connection for waste water discharge to under-table bucket
Full under-table chair storage	All 6 chairs slide completely under table when not in use
Seating arrangement design	Unobstructed access from all four table sides for group tea service
Integrated cup sterilization function	Built-in heating chamber for high-temperature teacup disinfection
Modular accessory placement zone	Dedicated flat surface section for tea caddies, vases and serving accessories
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office reception area	Formal business tea service for 6 guests during client meetings
Private club lounge	Premium tea experience space for social and business gatherings
High-end residential tea room	Home tea tasting space for family and friend gatherings
Hotel lobby hospitality zone	Wait-area beverage service for VIP guest reception
Recommended configuration	Pair with matching 6 upholstered metal-frame tea chairs and under-table water bucket cabinet
Surface suitability	Direct placement of hot teapots, teacups and tea serving accessories without coasters

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Applicable for strength, durability and safety requirements for domestic tables
EN 60335-2-15:2021	Applicable for safety of electric water heating appliances integrated in furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB 28007-2011	Applicable for furniture mechanical safety performance requirements for reception tables
GB 18584-2001	Applicable for indoor stone furniture formaldehyde and heavy metal emission limits
GB 4706.1-2005	Applicable for safety of integrated household electrical tea heating appliances

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB 28007-2011：Applicable for furniture mechanical safety performance requirements for reception tables；
2. GB 18584-2001：Applicable for indoor stone furniture formaldehyde and heavy metal emission limits；
3. GB 4706.1-2005：Applicable for safety of integrated household electrical tea heating appliances；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · GT-PED2400-BLK-6CH

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · GT-PED2400-BLK-6CH

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · GT-PED2400-BLK-6CH打开导出工具

页面快速操作

发布采购询价

产品描述

This contemporary rectangular gongfu tea table, model GT-PED2400-BLK-6CH, is an unbranded light luxury public furniture piece designed for dedicated tea service, paired with six matching upholstered metal-frame chairs to form a cohesive 6-seat configuration. Its sleek silhouette features a long rectangular tabletop supported by two patterned natural marble pedestals positioned to leave open access on all four sides, with a 10 mm softened corner radius and mitered polished stone edges that eliminate sharp points. When not in use, all six chairs slide fully beneath the table to maintain a clean, uncluttered footprint in compact spaces.
The 30 mm thick tabletop is crafted from black matte sintered stone finished with a nano anti-stain coating, engineered to support 300 kg of static load, resist surface temperatures up to 1200 °C, and earn a grade 4 abrasion resistance rating, allowing direct placement of hot teapots and servingware without coasters. The dual pedestal bases are cut from polished black-and-white patterned natural marble blocks, sized to provide stable support with 680 mm of unobstructed knee clearance for seated guests. An embedded black tempered glass control panel houses the integrated gongfu tea system, with a brass drain fitting connected to a concealed wastewater line routed to an under-table storage bucket. The integrated system includes a 1.2 L electric kettle with one-button automatic water refill and three temperature presets calibrated for different tea varieties, plus a 0.8 L high-temperature cup sterilization chamber, with 1500 W heating power for the kettle and 700 W for the sterilizer. A dedicated flat zone on the tabletop accommodates tea caddies, decorative accents, and serving accessories. The matching chairs feature gunmetal gray brushed stainless steel frames, high-density foam cushioning wrapped in off-white top-grain leather, and vertical brushed stainless steel back supports. Major structural joints use M6-M10 connectors with at least two fixing points per connection, with primary load-bearing components built to 40 mm thickness for long-term durability.
This set is well suited for executive office reception areas hosting formal client meetings, private club lounges for social and business gatherings, high-end residential tea rooms for family and friend visits, and hotel lobby hospitality zones serving VIP waiting guests. Procurement teams should note each set ships in two cartons with a total packaged gross weight of 120 kg and 0.8 m³ packaging volume, requiring 40 minutes of on-site assembly per unit. It is recommended to pair the table with a coordinating under-table water bucket cabinet to complete functional installation.

Contemporary Rectangular Gongfu Tea Table with Dual Patterned Marble Pedestals Specifications

供应商与现货