The Modern Narrow Matte Black Tea Table (model TT-MB1808075-GL) is an unbranded fixed-structure mixed-material piece defined by a sleek minimalist silhouette. Its asymmetrical layout balances visual lightness and structural presence: one end rests on a solid matte black block leg, while the opposite end is supported by dual smoked tempered glass panels, creating an open, uncluttered profile. The 15mm matte dark sintered stone tabletop features fine matte polished chamfered edges with a 2mm radius, offering a refined, soft touch. Sturdy internal construction underpins the streamlined form: the tabletop is reinforced with 18mm plywood support bracing, while glass panels connect to the tabletop via stainless steel concealed mounting brackets, with M6-M10 connectors and a minimum of two fixing points at each major joint. Non-slip EVA rubber pads at the floor contact points protect flooring and prevent unwanted movement, while the dual support system eliminates tabletop wobble. All primary load-bearing components use 40mm thick material for long-term durability. The table’s flat, non-porous matte surface resists tea and water spills, holds up to 150kg of static load, and withstands 200°C of direct heat for one hour without deformation, making it well suited for gongfu tea service placement. It delivers Grade 4 abrasion resistance, 50MPa flexural strength, and stands up to 2000 abrasion cycles without surface coating damage. Open knee clearance on three sides, with 690mm of height and 700mm of depth, supports unobstructed seated use for up to four people, with a standard configuration compatible with two low upholstered stools and one upholstered armchair. The piece is ideal for executive office reception lounges hosting guest tea service, minimalist residential living room tea corners for daily use, small private tea rooms for dedicated gongfu sessions, and creative studios for casual small team discussions over light refreshments. When procuring, note the product ships knock-down across two cartons, with a total packaged gross weight of 120kg, 0.8m³ packaging volume, and 40-minute assembly time per set. The fixed structure includes no moving mechanical parts, and comes with a 5-year structural warranty.