商品供应商Glossy Sintered Stone Rectangular 6-Seat Tea Dining Table with Dual Cylindrical Pedestal Bases，High-gloss polished sintered stone, scratch and stain resistant
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 2400 × 800 × 750 mm | |
|---|---|---|
| tabletop thickness | 50 mm | |
| pedestal diameter | 350 mm | |
| pedestal height | 710 mm | |
| knee clearance height | 680 mm | |
| integrated tea tray dimensions | 1200 x 400 mm | |
| edge trim thickness | 2 mm | |
| clear floor space per seat | 600 mm | |
| distance between two pedestals | 1400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| tabletop static distributed load | 260 kg | |
|---|---|---|
| tabletop heat resistance | 1200 °C | |
| tabletop Mohs hardness | 7 | |
| seating capacity | 6 persons | |
| tabletop water absorption rate | 0.1% | |
| pedestal base static load capacity | 300 kg | |
| surface wear resistance (abrasion cycles) | 20000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| tabletop surface | High-gloss polished sintered stone, scratch and stain resistant | |
|---|---|---|
| table edge trim | Dark polished stainless steel, 2mm thick, wrapped around table perimeter | |
| pedestal supports | Thickened dark polished stainless steel cylindrical columns, welded internal reinforcement | |
| integrated tea tray | Dark matte sintered stone, recessed flush with tabletop surface | |
| tabletop core backing | High-density MDF reinforcing panel, 38mm thick, bonded to stone slab | |
| base connection hardware | Grade 8.8 carbon steel mounting bolts, M10 size, 8 bolts per pedestal | |
| pedestal base bottom pads | Non-slip rubber floor protectors, 5mm thick, 6 per base | |
| surface finish coating | Nanoscale anti-fingerprint clear coat, 0.05mm thick, applied to polished stone | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| integrated tea service surface | Recessed flush-mounted stone tea tray positioned centrally for shared tea preparation | |
|---|---|---|
| fixed height dining configuration | 750mm standard dining height, compatible with 450 mm seat height dining/tea chairs | |
| 360-degree accessible seating | Open perimeter without cross supports, allowing seating on all four table sides | |
| heat-resistant service surface | Sintered stone top supports direct placement of hot teapots and boiling water vessels without surface damage | |
| stain-resistant easy-clean surface | Non-porous polished surface allows wipe-clean of tea and food spills without seepage | |
| knock-down assembly design | Tabletop and two pedestals ship separated for transport, secured via bolted connections during setup | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| office reception lounge | Fits executive reception areas for hosting guest tea service and informal meetings | |
|---|---|---|
| luxury residential dining space | Serves as combined dining and tea service table in open-plan living or dining areas | |
| private tea room | Functions as dedicated tea ceremony table with integrated service surface for tea preparation | |
| high-end club lounge | Suits VIP club lounge areas for member tea service and light dining | |
| commercial hospitality space | Works in boutique hotel lounge areas for guest reception and refreshment service |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 15372:2008 | Furniture – Durability requirements for non-domestic dining/tea tables |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to backing panel structure | |
|---|---|---|
| GB/T 4893.9-2013 | Surface heat resistance test method for furniture finishes, applicable to tabletop | |
| GB 28007-2011 | Furniture mechanical performance test for tables, applicable to structural stability |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to backing panel structure； 2. GB/T 4893.9-2013：Surface heat resistance test method for furniture finishes, applicable to tabletop； 3. GB 28007-2011：Furniture mechanical performance test for tables, applicable to structural stability； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具