| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
Polished Reddish-Brown Two-Tier Open-Shelf Coffee Table with Stepped Block Legs,型号 CT-RW-2T-1200,归属“Traditional Coffee Table”栏目,整体尺寸 1200 × 600 × 500 mm,主材为MDF。承重参数:100 kg。认证标签:glossy,wood,finish,two-tier,open,storage,stepped,block,leg,structure,stationary,rectangular,form。本页汇总该型号 6 类产品参数及 GB 标准参考,支持公制与英制单位切换,目前已登记 1 家供应商,可直接发起询价。
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| Overall assembled dimensions | 1200 x 600 x 500 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Lower shelf dimensions | 1080 x 480 mm | |
| Lower shelf clearance from floor | 105 mm | |
| Open central void height between tiers | 265 mm | |
| Side support assembly width | 120 mm | |
| Stepped base foot thickness | 25 mm | |
| Tabletop edge overhang | 30 mm | |
| Lower shelf edge thickness | 20 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Tabletop distributed static load capacity | 100 kg | |
|---|---|---|
| Assembled product net weight | 26 kg | |
| Surface finish abrasion resistance | 400 cycles | |
| Floor contact pad load distribution | 0.4 MPa | |
| Recommended placement weight tolerance | 500 kg/m² | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Tabletop surface | High-gloss reddish-brown wood veneer over 18mm MDF/plywood substrate | |
|---|---|---|
| Lower shelf panel | Matching reddish-brown veneered engineered wood with raised edge lip | |
| Stepped block side supports | Solid rubberwood/acacia block construction with matching stain finish | |
| Connector hardware | Zinc-plated steel cam-lock and bolt fasteners with pre-drilled holes | |
| Floor protection pads | 5mm thick self-adhesive felt pads affixed to base feet | |
| Top edge profile | Slightly eased 2mm radius edge with layered veneer edge banding |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Storage configuration | Two-tier open design with full-span lower shelf for media, books, and decor | |
|---|---|---|
| Assembly requirement | Knock-down assembly with included hardware and illustrated instructions | |
| Floor stability | Wide stepped base feet for four-point contact on level hard or carpeted floors | |
| Surface maintenance | Stain-resistant glossy finish wipeable with damp soft cloth |
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Primary application | Living room placement in front of sofas for beverage, decor, and remote storage | |
|---|---|---|
| Suitable environments | Residential lounges, office reception areas, and formal meeting waiting spaces |
欧洲市场准入与化学品要求
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of formaldehyde for wood furniture, applicable for emission testing | |
| GB/T 4893.1-2021 | Furniture surface test for resistance to cold liquids, applicable for finish durability acceptance |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for dimensional and structural quality checks; 2. GB 18584-2001:Indoor decorating and refurbishing materials - limit of formaldehyde for wood furniture, applicable for emission testing; 3. GB/T 4893.1-2021:Furniture surface test for resistance to cold liquids, applicable for finish durability acceptance; 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告,可选择公制或英制单位。
导出全部商品信息与参数模块,文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具