商品供应商Red-Brown Wood Veneer Office Tea Service Credenza with Glass Doors and Control Panel,MDF
可联系供应商获取生产周期与报价。
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| Overall dimensions | 1824 x 550 x 900 mm | |
|---|---|---|
| Top surface thickness | 45 mm | |
| Plinth base height | 80 mm | |
| Central drawer internal dimensions | 760 x 380 x 120 mm | |
| Glass door panel size per door | 320 x 480 mm | |
| Solid side door width per door | 372 mm | |
| Adjustable shelf thickness in glass compartments | 18 mm | |
| Back panel thickness | 16 mm | |
| Clear glass panel thickness | 5 mm | |
| Carved decorative trim height below top | 25 mm | |
| Handle length (doors and drawer) | 120 mm | |
| Control panel strip length (top right) | 220 mm | |
| Internal shelf spacing in glass cabinets | 220 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Top surface static load capacity | 80 kg | |
|---|---|---|
| Paint surface pencil hardness | 2H | |
| Substrate formaldehyde emission | 0.05 mg/m³ | |
| Wood moisture content | 12% | |
| Door hinge cycle rating | 80000 open/close cycles | |
| Drawer slide cycle rating | 50000 open/close cycles | |
| Top surface load height clearance | 820 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Cabinet substrate | E1 grade MDF core | |
|---|---|---|
| Exterior surface | 0.6mm natural wood veneer with red-brown water-based paint | |
| Central door panels | 5mm clear tempered glass | |
| Hardware pulls and hinges | Brushed zinc alloy metal, nickel finish | |
| Plinth base | Solid wood veneered engineered wood | |
| Edge banding | 6mm solid wood edge trim |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Door storage access | Four hinged doors open to side solid storage and central display storage | |
|---|---|---|
| Central drawer access | Full-width lower central drawer on side-mount slides | |
| Integrated appliance control | Top-right button strip controls compatible integrated tea boiler functions | |
| Adjustable shelving | Two adjustable shelves in glass compartments |
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Executive office placement | Positioned against office wall near seating area for guest tea service | |
|---|---|---|
| Office pantry use | Installed in open or private pantries for tea set and supply storage |
欧洲市场准入与化学品要求
| EN 14749:2016 | Safety and structural requirements for domestic and office storage furniture | |
|---|---|---|
| EN 312:2010 | Performance requirements for MDF panels used in cabinet construction |
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural performance and finish quality | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable to substrate material safety | |
| GB/T 4893.4-2013 | Surface paint film hardness and abrasion resistance test for furniture finishes |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable to structural performance and finish quality; 2. GB 18580-2017:Formaldehyde emission limits for wood-based panels, applicable to substrate material safety; 3. GB/T 4893.4-2013:Surface paint film hardness and abrasion resistance test for furniture finishes; 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告,可选择公制或英制单位。
导出全部商品信息与参数模块,文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具