The High Back Solid Wood Frame Black Faux Leather Executive Guest Conference Chair, model WDC-GC-HB01, is an unbranded formal public seating solution designed for professional commercial environments. It presents a structured, elegant silhouette defined by a high-back profile, integrated curved fixed wood armrests, and a stationary fixed-frame build that supports cohesive, polished permanent space layouts. Its frame is constructed from solid bentwood finished with a cured reddish-brown lacquer, joined with zinc-plated steel dowels, screws, and wood glue connectors for robust structural integrity. The tapered front legs measure 45 by 45 mm in cross-section, while straight rear legs measure 40 by 40 mm, each capped with injection-molded black nylon glides that prevent hard floor scratching and unintended sliding. Seat and back surfaces are upholstered in 1.2 mm thick wear-resistant black PU faux leather, stitched with polyester bonded thread at a density of 8 stitches per 30 mm seam, rated for 50000 Martindale double rubs for long-term use. Internal support relies on a bent plywood seat panel, with an 80 mm thick cold-molded high-resilience polyurethane foam seat cushion (35 kg/m³ density, 60% rebound rate) and a 60 mm thick segmented high-resilience foam backrest. The chair holds a 15 kg net weight, supports a 150 kg static user weight, carries a 90 kg backrest static load rating, and a 1200 N frame joint static load rating, backed by a 5-year standard warranty. For user comfort, the fully fixed non-adjustable structure (no swivel, tilt, or height modification) features segmented horizontal backrest padding for aligned lumbar and mid-back support, a slightly waterfall-front seat edge that reduces pressure on the back of the legs, and continuous elbow support from integrated armrests. It is non-stackable, suited for permanent layout placement. This chair fits formal boardrooms and meeting rooms around conference tables, visitor positions in front of 2.4 m executive desks, corporate reception and VIP waiting areas with traditional decor, and fixed-layout training rooms. It pairs seamlessly with matching reddish-brown solid wood executive desks and conference tables. For procurement, note the knockdown design requires 40 minutes of assembly per set to attach legs to the pre-assembled seat and back frame with included hardware; each unit ships in 2 cartons with a 23 kg packaged gross weight and 0.26 m³ total carton volume. Overall dimensions are 740 mm wide, 830 mm deep, and 1180 mm tall, with a 460 mm seat height, 500 mm usable seat width between armrests, 500 mm seat depth, 720 mm backrest height from seat to top, and 650 mm armrest height from floor.