| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 520 x 584 x 991 mm | |
|---|---|---|
| Seat height from floor | 498 mm | |
| Seat usable width | 470 mm | |
| Seat usable depth | 495 mm | |
| Backrest height above seat | 493 mm | |
| Seat cushion thickness | 63 mm | |
| Leg cross-section dimension | 40 x 40 mm | |
| Backrest panel thickness | 12 mm | |
| Front leg clearance under seat | 450 mm | |
| Upholstered back width at widest point | 480 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Recommended static load capacity | 125 kg | |
|---|---|---|
| Seat foam density | 35 kg/m³ | |
| Backrest foam density | 30 kg/m³ | |
| Foam rebound rate | 40% | |
| Foam compression set rate | 6% | |
| Hardwood frame moisture content | 12% | |
| Upholstery tear resistance | 100 N | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Structural frame | Cherry-finish bentwood/hardwood with mortise-and-tenon joinery | |
|---|---|---|
| Seat support panel | 12 mm E0 grade bent plywood with corner reinforcing blocks | |
| Seat cushion fill | High-resilience polyurethane foam with density 35 kg/m³ | |
| Backrest fill | High-resilience polyurethane foam with density 30 kg/m³ | |
| Upholstery material | 1.5 mm thick black faux leather (vinyl) with wear-resistant finish | |
| Leg feet | Non-marring plastic glide pads fitted to each leg bottom | |
| Frame finish | Smooth clear lacquer topcoat with satin cherry tone | |
| Upholstery attachment | Stapled to plywood substrate with finished edge binding | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating posture support | Fixed upright backrest angle for dining/conference upright seated posture | |
|---|---|---|
| Entry clearance | Armless design allows unobstructed side entry for tight table spacing | |
| Floor protection | Fixed non-marring glides prevent scuffing on hard floor surfaces | |
| Structural rigidity | Solid bentwood side stretchers connect front and rear legs to eliminate wobble | |
| Stacking capability | Non-stacking fixed frame design for permanent seating layouts | |
| Adjustment features | No height, tilt, swivel, or recline adjustment for fixed-position seating | |
| Cleaning compatibility | Smooth non-porous faux leather upholstery allows wipe-clean maintenance | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
推荐空间 / 目标用户 / 使用方式
| Residential dining area use | Suitable for home dining tables in apartments or houses with standard 750 mm table height | |
|---|---|---|
| Commercial conference room use | Appropriate for meeting room table seating in offices or training facilities | |
| Break room/guest seating use | Suitable for office break areas, reception waiting zones, or small cafe seating | |
| Small space layout compatibility | Armless narrow profile works in compact dining nooks or tight seating configurations | |
| Matching furniture coordination | Pairs with cherry-finish wood dining tables, conference tables, or sideboards for cohesive decor | |
| Floor surface compatibility | Suitable for use on hardwood, tile, laminate, or low-pile carpeted floors with fitted glides | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
欧洲市场准入与化学品要求
| EN 12520:2015 | Domestic furniture seating strength/durability/safety, applicable to non-contract domestic dining use | |
|---|---|---|
| EN 16139:2013 | Contract non-domestic seating strength/durability/safety, applicable to commercial conference seating | |
| EN 13356:2009 | Anti-slip furniture foot glide performance requirements, applicable to leg floor protection components |
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame construction and finish quality | |
|---|---|---|
| GB/T 16799-2008 | Furniture leather/synthetic leather requirements, applicable to upholstery material performance | |
| GB 18584-2001 | Indoor decorating materials limit of harmful substances for wooden furniture, applicable to formaldehyde/VOC limits | |
| GB/T 38609-2020 | Furniture mechanical performance test methods for seating, applicable to static load and durability verification |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to frame construction and finish quality； 2. GB/T 16799-2008：Furniture leather/synthetic leather requirements, applicable to upholstery material performance； 3. GB 18584-2001：Indoor decorating materials limit of harmful substances for wooden furniture, applicable to formaldehyde/VOC limits； 4. GB/T 38609-2020：Furniture mechanical performance test methods for seating, applicable to static load and durability verification； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
