The FXC-WD01-HB-BK is an unbranded executive office conference chair defined by a formal, timeless silhouette anchored by a red-brown glossy stained solid wood frame paired with black leather upholstery. Its high-back profile follows a structured, segmented channel-quilted design, with fixed curved integrated wood armrests that flow seamlessly from the frame for a cohesive, polished look. The chair rests on a stationary four-leg base, with no protruding adjustment mechanisms to disrupt its clean, executive aesthetic, aligned with formal furnishing palettes for high-use professional spaces. Structural integrity is delivered through a combination of traditional mortise-tenon joinery and zinc-plated steel screws, which prevent frame loosening over extended use. The load-bearing solid hardwood frame is finished with eco-friendly water-based wood lacquer, calibrated to a 12% moisture content to resist warping. Seat and back support comes from 15mm thick E1 grade bent plywood, padded with molded high-resilience polyurethane foam: the 150mm thick seat uses 35 kg/m³ density foam, while the segmented backrest uses 30 kg/m³ density foam, with a 40% rebound rate and 6% compression set for consistent cushioning. Upholstery uses 1.5mm thick black split leather and PU leather, stitched with high-strength polyester thread at an 8mm stitch pitch for durability. Each leg is fitted with a non-slip rubber foot cap to protect floor surfaces. Designed for stationary use, the chair has no casters, swivel, tilt, or gas lift height adjustment, holding a fixed 500mm seat height that pairs with standard 760mm height conference tables and 2.4m executive desks. The segmented high back delivers targeted lumbar, mid-back, and upper back support, while the thick seat cushion reduces pressure during meetings lasting two hours or more, with a recommended static user load of 400 kg. Fixed armrests provide stable forearm support, and rubber foot caps eliminate movement noise and hard floor scratches. This chair is suited for executive meeting rooms and boardrooms where formal styling aligns with premium space aesthetics, visitor reception areas that require stable, professional guest seating, private executive office guest zones, government and institutional meeting spaces built for heavy public use, and conference center training rooms. For procurement, note each unit ships in two cartons, requires 40 minutes of assembly per set, and 135 sets can fit in a 20GP container at 85% space utilization, with a packaged gross weight of 23 kg per set and 0.26 m³ carton volume.