纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 800 × 730 mm
Overall desk dimensions	1800 x 800 x 730 mm
Desktop panel thickness	25 mm
Under-desk knee clearance height	705 mm
Under-desk knee clearance width	1600 mm
Metal leg tube wall thickness	1.2 mm
ABS edge banding thickness	2 mm
Cable management cutout length	200 mm
Cable grommet internal diameter	80 mm
Leg frame width (front to back)	780 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Desktop static load capacity	100 kg
Net product weight	47 kg
Surface scratch resistance rating	2000 cycles
Surface heat resistance	120 °C
Recommended user capacity	1 person
Floor leveller adjustment range	10 mm
Product structural warranty	60 months
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Desktop substrate	E1-grade high-density particleboard
Desktop finish	White matte melamine laminate
Edge protection	2mm ABS edge banding
Leg frame	Powder-coated carbon steel square tube
Fasteners	Zinc-plated steel screws and brackets
Floor contact pads	Non-slip TPE adjustable levellers
Cable port trim	Black ABS plastic grommet
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cable management cutout	Embedded rectangular port routes monitor/laptop cables off desktop
Adjustable floor levellers	Rotating pads adjust height to stabilize desk on uneven floors
Freestanding open frame design	No modesty panel or storage, allows unobstructed leg and chair movement
Scratch-resistant work surface	Melamine finish resists scuffs from office equipment and writing tools
Flat-pack assembly	Knock-down construction with pre-drilled holes for on-site assembly
Smooth edge profile	Rounded safety edges eliminate sharp contact points at desk perimeter
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive private office	Provides large clean work surface for managerial daily work and meetings
Home office workstation	Minimalist design fits modern residential interiors, supports computer and document work
Open-plan work area	Freestanding design works as individual workstation in co-working or office spaces
Small conference breakout space	Long surface supports 3people for quick informal meetings
Design studio workspace	Smooth white surface supports drawing, laptop work and layout of design materials

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office work tables safety and strength requirements, applicable for commercial use evaluation
EN 527-2:2016	Office work tables dimensional and structural requirements, aligns with seated work height standards
EN 13722:2004	Furniture edge and surface durability requirements, applies to melamine finish performance

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard, reference for load and stability testing
ANSI/BIFMA e3-2019	Furniture sustainability standard, reference for material emission and recycled content criteria

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to desk top and structural assembly
GB/T 3327-2016	Performance requirements for office desks, applies to load, stability and dimensional tolerance
GB 18580-2017	Formaldehyde emission limits for engineered wood, applies to desktop substrate compliance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to desk top and structural assembly；
2. GB/T 3327-2016：Performance requirements for office desks, applies to load, stability and dimensional tolerance；
3. GB 18580-2017：Formaldehyde emission limits for engineered wood, applies to desktop substrate compliance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXD-U1808-WHT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXD-U1808-WHT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXD-U1808-WHT打开导出工具

页面快速操作

发布采购询价

产品描述

This minimalist rectangular white executive office desk, model EXD-U1808-WHT, presents a clean, understated visual profile defined by its crisp white matte desktop and contrasting open-frame U-shaped metal leg structure, without an attached modesty panel or built-in storage to preserve a light, uncluttered silhouette. The unobstructed under-desk area creates generous open space that allows free movement for office chairs and leg positioning. Its worktop is constructed from E1-grade high-density particleboard clad in white matte melamine laminate, with a primary panel thickness supported by composite build-up for load-bearing performance, finished with smooth rounded ABS edge banding to eliminate sharp contact points around the full desk perimeter. The U-shaped leg frame is fabricated from powder-coated carbon steel square tube, secured with zinc-plated steel fasteners, and fitted with non-slip TPE adjustable levellers at each floor contact point to stabilize the unit on uneven flooring. The desktop surface resists scuffs from regular office equipment and writing tools, and withstands incidental heat exposure from common workplace items. An embedded rectangular cable cutout, fitted with a black ABS grommet, routes power and data cables for monitors, laptops and peripherals away from the work surface to cut down on visual clutter. The desk is built for single-user primary use, and can support small group gatherings for quick, informal discussions. It is suited for a range of spaces, including private executive offices for daily managerial work and small in-office meetings, modern home office workstations that align with minimalist residential interiors, individual workstations in open-plan co-working environments, small breakout conference areas, and design studios where the smooth white surface supports sketching, digital work and laid-out design materials. Procurement teams and individual buyers should note the desk ships as a knock-down flat-pack unit with pre-drilled holes for straightforward on-site assembly, requiring standard on-site build time. Orders are packed across multiple cartons, so teams should plan for adequate receiving and storage space prior to installation. The product is backed by a structural warranty, and its freestanding design requires no fixed mounting to floors or walls for placement flexibility.

Minimalist Rectangular White Executive Office Desk with U-Shaped Metal Legs Specifications

供应商与现货