基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| Overall footprint | 1800 x 1600 x 750 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Net weight | 78 kg | |
|---|---|---|
| Distributed desktop load | 80 kg | |
| Credenza top load | 45 kg | |
| Internal shelf load per level | 20 kg | |
| Recommended user capacity | 1 person | |
| Drawer slide rating if fitted | 35 kg per drawer | |
| Leveling adjustment | 10 mm | |
| Hardware cycle target | 50,000 drawer or door cycles | |
| Warranty target | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Desktop and return top | 25 mm melamine-faced particleboard or MDF substrate with matching edge banding | |
|---|---|---|
| Storage cabinet carcass | 18 mm melamine-faced engineered-wood panels with light gray exterior finish | |
| Modesty panel | 18 mm light gray engineered-wood privacy panel with exposed edge protection | |
| Leg and support frame | Powder-coated steel square tube with splayed front legs and rear support rails | |
| Cable access fitting | Rectangular brushed-finish plastic or aluminum grommet plate with recessed slots | |
| Hardware and base | Steel fixing brackets, adjustable plastic or steel leveling feet, and black plinth pads |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| L-shaped work layout | Main desk and right-hand return provide separate laptop, writing and document zones within one connected workstation | |
|---|---|---|
| Cable routing | Desktop cable port feeds wires below the work surface toward the return cabinet for computer and charging equipment | |
| Privacy and leg screening | Rear modesty panel blocks underside view while retaining open front knee access for a task chair | |
| Storage and equipment support | Floor-standing credenza supports the return top and provides door, shelf or drawer storage behind the visible ventilated end panel |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Main carton dimensions | 1860 x 760 x 120 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Private executive office | Provides a seated laptop position, side meeting surface and personal storage for managers or directors | |
|---|---|---|
| Open-plan supervisor workstation | Suits team leaders needing a large document surface, cable control and under-desk privacy without a full private room |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 527-1 | Applies to office work desk dimensions, safety and structural requirements for the seated work surface | |
|---|---|---|
| EN 527-2 | Provides mechanical safety, stability and durability test methods for office desks | |
| EN 15372 | Applies to strength, durability and stability requirements for non-domestic storage furniture | |
| EN 120 | Defines perforator formaldehyde determination for wood-based panels | |
| EN 14073-2 | Applies to safety requirements for office storage furniture |
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| ANSI/BIFMA X5.5 | Desk and table products standard covering load, stability and durability tests | |
|---|---|---|
| ANSI/BIFMA X5.9 | Storage units standard covering strength, stability and drawer or shelf cycling | |
| BIFMA E3 level | Sustainability framework applicable to furniture materials, energy, human health and social responsibility |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324 | Applicable general technical specification for wooden furniture dimensions, workmanship and structural stability | |
|---|---|---|
| GB/T 3325 | Applicable metal furniture technical requirements for steel legs, rails and coated metal surfaces | |
| GB/T 35607 | Applicable furniture green-product evaluation covering restricted substances and product documentation | |
| GB 18580 | Applicable formaldehyde emission limit for wood-based panels used in the desk and cabinet | |
| GB/T 10357.5 | Applicable furniture table strength and durability test method for desktop and support loading |
本产品须满足以下技术参数要求: 1. GB/T 3324:Applicable general technical specification for wooden furniture dimensions, workmanship and structural stability; 2. GB/T 3325:Applicable metal furniture technical requirements for steel legs, rails and coated metal surfaces; 3. GB/T 35607:Applicable furniture green-product evaluation covering restricted substances and product documentation; 4. GB 18580:Applicable formaldehyde emission limit for wood-based panels used in the desk and cabinet; 5. GB/T 10357.5:Applicable furniture table strength and durability test method for desktop and support loading; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具