纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3600 × 1400 × 760 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	165 kg
Distributed tabletop load	300 kg
Concentrated load recommendation	50 kg
Horizontal stability rating	120 kg
Drawer-slide or moving-cycle duty	Not applicable
Cable cover removal cycles	5000 cycles
Surface impact acceptance	45 N-m
Floor pressure	0.012 N/mm2
Warranty target	5 years
Seating capacity layout	12 persons

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	25 mm engineered wood panel with 50 mm built-up edge profile
Top surface finish	Dark brown melamine or high-pressure laminate with matte wood grain
Edge treatment	Matching dark PVC or ABS edge band with rounded profile
End support cabinets	Light warm-grey painted or melamine-faced engineered panels
Inset side accents	Dark grey vertical panels recessed into each end support
Central support and cable hardware	Powder-coated steel or aluminium channel frame with removable panel covers

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Central cable routing	Two 2400 x 65 mm removable covers provide access to a concealed centre channel for power, HDMI and network cables
Meeting equipment layout	The 180 mm central service zone leaves 610 mm usable depth on each side for laptops, documents and elbow room
Floor-standing support	Two box-style end pedestals and one central T-support transfer load directly to the floor without wall fixing
Assembly method	Knock-down panel-and-connector assembly with cam bolts, corner brackets and foot-to-top screws

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total packaging volume	1.32 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate boardroom	Install in a 5200 x 3000 mm room to seat 12 participants with space for chairs, circulation and wall display equipment
Meeting and training suite	Use for laptop-based meetings because the centre channel supports power and data while each participant retains 610 mm table depth

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables and desks safety, strength and durability requirements
EN 527-2:2002	Mechanical test methods for office tables, including vertical static load, durability and stability
EN 15372:2016	Safety, strength and durability requirements for non-domestic storage furniture; use only if enclosed support cabinets contain storage
EN 13986:2004+A1:2015	Wood-based panels for construction use, useful as a panel-performance and declaration reference
EN 14073-2:2004	Safety requirements for office storage furniture; relevant only if lockable storage is incorporated into the pedestals

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Office tables standard for general safety, structural integrity, load tests and cyclic durability
ANSI/BIFMA X5.9-2019	Storage cabinets safety and durability standard, applicable only if the end supports are usable cabinets rather than fixed cladding
ANSI/BIFMA e3-2019	Furniture sustainability standard for material, energy, human-health and social impact credits

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop panels, edge bonding, dimensions and structural stability
GB/T 3325-2017	Test method for wooden furniture surfaces, applicable to wear resistance, heat resistance, stain resistance and film adhesion checks
GB/T 10357.5-2011	Furniture mechanical surface test for strength, applicable to distributed and concentrated tabletop load testing
GB/T 10357.7-2013	Furniture table mechanical test for stability, applicable to lateral and end-use overturning checks
GB 18584-2001	Indoor decorative-material limit of formaldehyde release for wood-based furniture
GB/T 28204-2020	Technical requirements for movable furniture hardware, applicable to removable access covers and connectors where hardware is used

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop panels, edge bonding, dimensions and structural stability；
2. GB/T 3325-2017：Test method for wooden furniture surfaces, applicable to wear resistance, heat resistance, stain resistance and film adhesion checks；
3. GB/T 10357.5-2011：Furniture mechanical surface test for strength, applicable to distributed and concentrated tabletop load testing；
4. GB/T 10357.7-2013：Furniture table mechanical test for stability, applicable to lateral and end-use overturning checks；
5. GB 18584-2001：Indoor decorative-material limit of formaldehyde release for wood-based furniture；
6. GB/T 28204-2020：Technical requirements for movable furniture hardware, applicable to removable access covers and connectors where hardware is used；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CF-RCT-3600-CBL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CF-RCT-3600-CBL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CF-RCT-3600-CBL打开导出工具

页面快速操作

发布采购询价

产品描述

The Large Two-Tone Rectangular Conference Table with Central Cable Trays, model CF-RCT-3600-CBL, presents an executive rectangular form suited to formal meeting environments. Its dark brown matte wood-grain tabletop is balanced by light warm-grey end support cabinets, while dark grey vertical panels are recessed into each support to create a structured two-tone appearance. The layout uses two box-style end pedestals and one central T-support, all transferring load directly to the floor without requiring wall fixing. The finished top is 45 mm thick, combining a 25 mm engineered wood substrate with a 50 mm built-up edge profile. The surface is available in dark brown melamine or high-pressure laminate with a matte wood grain, and the matching dark PVC or ABS edge band follows a rounded profile. End supports use light painted or melamine-faced engineered panels, with the main support section measuring 80 mm and a 2 mm metal wall. Central support and cable-management components use powder-coated steel or aluminium channel framing with removable panel covers. The table weighs 165 kg and is rated for a 300 kg distributed tabletop load, a 50 kg concentrated load recommendation, and a 120 kg horizontal stability rating. Surface impact acceptance is 45 N-m, and the cable covers are rated for 5000 removal cycles. Functionality is centered on cable management. Two removable 2400 by 65 mm covers provide access to a concealed centre channel for power, HDMI, and network cables. Each cable opening is 80 mm in diameter, with a cable tray depth of 120 mm. The 180 mm central service zone retains 610 mm of usable depth on each side for laptops, documents, and personal meeting space. Each main seat has 680 mm of knee clearance height and 900 mm of clearance width. The table is well suited to corporate boardrooms and meeting or training suites, particularly laptop-based sessions requiring power and data access. A 5200 by 3000 mm room can accommodate the table with seating for 12 participants, chair movement, circulation, and wall display equipment. Procurement teams should note the unbranded product is supplied as a knock-down panel-and-connector assembly using cam bolts, corner brackets, and foot-to-top screws. The reference assembly time is 40 minutes per set. It ships as one set in two cartons, with reference packaging dimensions of 2100 by 1100 by 300 mm, total packaging volume of 1.32 CBM, and packaged gross weight listed as 90 kg per set across the two-carton configuration.

Large Two-Tone Rectangular Conference Table with Central Cable Trays Specifications

供应商与现货