The Modern Low Rectangular Cantilever Coffee Table, model CT-LW-14060-CNT from an unbranded line, delivers a refined two-tone minimalist silhouette anchored by intentional cantilevered geometry. Its clean rectangular form features a dark walnut-effect tabletop that extends 180 mm past one end of the supporting plinth, creating a dynamic, asymmetrical visual profile without excess ornamentation. The 1400 x 600 x 350 mm table sits low to the floor, with a compact 1040 x 520 mm matte dark grey plinth base positioned off-center to emphasize the cantilever, paired with a 60 mm front recessed gap and 8 mm floor clearance for a light, grounded appearance. Construction balances durability and tactile finish. The tabletop uses an 18 mm MDF core surfaced with dark walnut wood veneer, sealed under a matte clear polyurethane coating with 0.1 mm dry film thickness, with a total tabletop thickness of 38 mm built up from composite layers for load-bearing performance. The plinth base is formed from 25 mm medium-density fiberboard finished with matte dark grey paint, with sealed edges shaped to a 1 mm radius, fastened with 5 mm x 50 mm steel confirmat screws for rigid joinery. 8 mm thick non-slip polyethylene pads sit under each base corner to protect floor surfaces, and all panel substrates are calibrated to 10% moisture content for long-term shape retention. Functionality is tailored to everyday use. The flat continuous tabletop holds beverages, decor, and media items, with a 150 kg uniformly distributed static load rating, 60 kg standard distributed load capacity, and 2000-cycle surface abrasion resistance for regular contact. The 30 kg side load rating ensures base stability during regular use, while the front recessed gap allows unobstructed access for floor cleaning beneath the overhang. An integrated cable management tray accommodates up to 10 power or data cables with a 10 kg load rating, supporting media setups without visible cord clutter. Fixed non-adjustable base contact points deliver consistent placement, and primary joints support up to 5 controlled assembly cycles for long-term reusability. The table suits a range of contemporary spaces: it works as a central sofa anchor in residential living rooms, a guest surface in modern office lounge and breakout areas, a formal low display piece in luxury apartment reception zones, a curated showcase for design showrooms, and a convenient surface in low-seating home theater rooms, sized to accommodate up to 4 seated users. Procurement teams should note the product ships as 1 set across 2 cartons, with 40 minutes required for on-site assembly, 90 kg total packaged weight, and 0.55 m³ total packaging volume per unit to coordinate delivery and installation logistics appropriately.