The Dual-Tone Rounded Rectangular Conference Table with Central Cable Management (model CT-RD3600-FLT-CM) is an unbranded modern fixed panel-leg conference table designed for professional collaborative environments. Its silhouette follows a soft rounded rectangular form, with a dual-tone finish pairing wood-veneer tabletop surfaces with matte light beige panel legs, accented by vertical fluted solid wood veneer trim on the 200mm wide outer section of each 600mm wide end leg. The design allocates 760mm of edge space per seat, with 710mm of under-table knee clearance, and centers an 1800mm long, 350mm wide cable management panel along the table’s length to keep functional hardware integrated without disrupting the clean visual profile. Construction balances aesthetic refinement and structural rigidity, built around a 2mm thick rectangular steel tube internal subframe. The 50mm thick tabletop uses a high-density MDF core with a 0.6mm wood veneer overlay, finished with soft-radius PU edge banding matched to the veneer tone, and supported by 18mm matte lacquered MDF panel legs with intermediate side supports. The central cable panel features a matte beige ultra-fiber leatherette cover over an MDF core, with a brushed black ABS plastic wire grommet at its center, and sits above a recessed cable trough. 8mm thick adjustable non-slip rubber foot pads line the base, while the fluted end accents align with the tabletop veneer for a cohesive look. Practical functionality is tailored to meeting room needs: the recessed central trough routes power, HDMI, and network cables from floor access to tabletop devices, with capacity for 10 combined power and data cables, pre-sized to fit 2 AC outlets, 1 HDMI port, 1 RJ45 network connection, and 2 USB chargers. The table supports 450kg of distributed static load across its surface, 100kg point load per section, and 150kg lateral stability load, with a finish rated to resist scratches across 2000 abrasion cycles. The non-porous PU edge and tabletop finish enable quick wipe-clean sanitization between uses, while adjustable foot pads compensate for 15mm of floor unevenness to maintain a level surface. The table seats 8 people comfortably. This table fits a range of professional spaces, including corporate boardrooms for executive decision-making, open office collaboration zones for cross-departmental project work, training rooms for presenter-led sessions requiring shared device connectivity, executive client meeting spaces where a polished professional aesthetic supports positive first impressions, and small conference suites sized 5m x 4m, with sufficient perimeter space for chair circulation. For procurement, note the product ships as one set across two cartons, with a total packaged gross weight of 90kg and total packaging volume of 0.55 cubic meters; on-site assembly requires an 40 minutes per set, with a net product weight of 222kg. Confirm space measurements align with the 3600 x 1600 x 760mm overall footprint, and plan for appropriate handling support during delivery and installation given the unit weight.