纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 1200 × 750 mm
Tabletop thickness	23 mm
Flared base bottom diameter	650 mm
Knee clearance height from floor	700 mm
Table edge radius	3 mm
Pedestal top connection diameter	300 mm
Leveling foot adjustment height	10 mm
Per person seating arc length	942 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static distributed tabletop load	500 kg
Tabletop surface Mohs hardness	6
Recommended seating capacity	4
Net product weight	70 kg
Base finish scratch resistance	2H pencil hardness
Tabletop heat resistance	180 °C
Wobble resistance rating	Level 1
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface layer	White gray-veined engineered sintered stone
Tabletop core backing	18mm thick plywood support layer
Pedestal frame	2mm thick carbon steel welded construction
Pedestal finish	Matte black electrostatic powder coating
Top-to-base connection pads	5mm thick anti-slip silicone buffers
Leveling feet	Nylon-tipped threaded steel glides
Fastener hardware	Zinc-plated steel M8 connector bolts
Table edge finish	Polished rounded bevel
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tabletop configuration	Fixed non-extendable round surface
Leveling adjustment	Threaded glides on base bottom adjust up to 10mm
Seating access	Unobstructed 360° knee clearance around central pedestal
Surface usability	Stain, heat, and scratch resistant non-porous top
Floor protection	Soft nylon glide tips prevent hard floor scratching
Assembly requirement	Knock-down 2-component assembly (top + base)
Base stability	Flared geometric base footprint prevents tipping
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining space	Fits compact dining nooks for 4-person family meals, small footprint pedestal design
Small office break room	Suits casual staff meal and informal meeting use, easy to clean durable surface
Cafe and bistro seating	Matches contemporary commercial decor, stable base for high-traffic food service
Apartment open-plan living	Blends with modern minimalist interiors, no protruding legs to trip occupants
Reception lounge waiting area	Provides compact surface for refreshments and reading materials in office lobbies
Short-term rental furnishing	Durable construction and timeless style suits high-turnover furnished accommodation

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture for domestic use, strength/durability/stability requirements for dining tables
EN 15185:2011	Furniture surface resistance to abrasion, applicable to tabletop and base finishes
EN 15186:2011	Furniture surface resistance to scratching, applicable to stone and coated surfaces

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to table structural integrity
GB/T 4893.4-2013	Surface film adhesion test for furniture finishes, applicable to base powder coating
GB 6566-2010	Radionuclide limit for building decoration materials, applicable to stone tabletops
GB/T 17657-2013	Physical and chemical property test methods for wood-based panels, applicable to core backing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to table structural integrity；
2. GB/T 4893.4-2013：Surface film adhesion test for furniture finishes, applicable to base powder coating；
3. GB 6566-2010：Radionuclide limit for building decoration materials, applicable to stone tabletops；
4. GB/T 17657-2013：Physical and chemical property test methods for wood-based panels, applicable to core backing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RDT-BLK-PED-1200-WHT-VEIN

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RDT-BLK-PED-1200-WHT-VEIN

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RDT-BLK-PED-1200-WHT-VEIN打开导出工具

页面快速操作

发布采购询价

产品描述

This round 4-seater dining table features a clean, contemporary silhouette defined by its crisp circular tabletop and striking sculptural pedestal base, eliminating protruding legs to create a streamlined, uncluttered visual profile. The white veined tabletop is formed from a white gray-veined engineered sintered stone surface finished with a polished rounded bevel edge, backed by an 18mm thick plywood support layer for structural rigidity. Its matte black pedestal is constructed from 2mm thick welded carbon steel, coated in a scratch-resistant matte black electrostatic powder coating, with a flared geometric footprint that anchors the piece without overwhelming surrounding space. Anti-slip silicone buffers sit between the tabletop and pedestal to reduce movement and surface wear, while zinc-plated steel M8 connector bolts secure the two core components, with nylon-tipped threaded steel leveling glides fitted to the base foot. The fixed non-extendable tabletop delivers a non-porous, stain, heat, and scratch resistant surface suited for regular use, with a static distributed load capacity of 500kg, surface Mohs hardness of 6, and heat resistance up to 180°C. The central pedestal structure delivers unobstructed 360-degree knee clearance, with 700mm of clearance from floor to tabletop underside, allowing flexible, accessible seating for four people. The threaded glides adjust up to 10mm to correct for uneven floors, while their soft nylon tips prevent scratching on hard flooring surfaces, and the flared base design delivers Level 1 wobble resistance and reliable tip prevention. This table works seamlessly across residential compact dining nooks and open-plan apartment spaces, where its small footprint and leg-free design removes trip hazards and aligns with modern minimalist interiors. It also supports small office break rooms for casual staff meals and informal meetings, cafe and bistro seating for high-traffic food service, office reception waiting areas for refreshments and reading material placement, and short-term rental properties, where its durable construction and timeless style suits high-turnover furnished spaces. For procurement, note the product ships as a knock-down 2-component set across two cartons, with a net weight of 70kg and packaged gross weight of 90kg, requiring 40 minutes of assembly time per unit. The unbranded model RDT-BLK-PED-1200-WHT-VEIN measures 1200mm in diameter and 750mm in total height, with a 23mm tabletop thickness, 650mm flared base diameter, 300mm pedestal top connection diameter, 3mm table edge radius, and 942mm per person seating arc length, making it a consistent, adaptable choice for both residential and light commercial dining and gathering applications.

Round 4-Seater Dining Table with White Veined Top and Black Sculptural Pedestal Base Specifications

供应商与现货