The Two-Tone Upholstered Cantilever Visitor Chair with Integrated Armrests presents a refined high-back silhouette suited to professional reception and meeting settings. Its light neutral seat and inner back are framed by dark charcoal upholstered panels that wrap around the seat, back, and armrest areas, creating a structured two-tone appearance. Dark matching trim follows the panel edges, reinforcing the tailored, contemporary form. With overall dimensions of 640 x 620 x 1010 mm, the chair offers a 540 mm clear width between armrests and a single-person seating configuration. The fixed armrests are integrated into the wraparound side panels and sit 220 mm above the seat, producing a continuous visual line from back to seat. Comfort is supported by a padded seat and back, a shaped lower-back seam, and a segmented lumbar zone. The seat uses light neutral synthetic leather or polyurethane-coated fabric over 80 mm high-resilience polyurethane foam, while the finished cushion thickness is 90 mm. The back uses smooth light neutral upholstery over 60 mm polyurethane foam, with finished backrest padding of 70 mm and a 240 mm lumbar support zone. Beneath the upholstery, an internal molded plywood or engineered composite support shell provides backing. The chair is built on a chrome-plated welded steel cantilever sled frame with a 25 mm tube diameter and 2.0 mm wall thickness. The continuous frame allows controlled flex without pivoting joints, while four injection-molded polymer glides at the runner ends help reduce direct metal contact with the floor. As a non-swivel, non-caster design, it is intended to be lifted or slid when repositioned. The fixed 450 mm seat height and 100-degree relaxed back angle provide consistent visitor posture, and the 300 mm under-seat clearance supports routine floor cleaning. The model is appropriate for executive reception areas, manager office visitor zones, conference rooms, boardroom anterooms, corporate lounges, breakout spaces, and hotel or club business lounges. It works particularly well where visual consistency, quiet fixed seating, polished metal, and easy-to-maintain upholstery are priorities. Procurement teams should note the recommended occupant weight of 160 kg, the 320 kg static seat load used for verification, the 136 kg backrest rearward pull test target, and the 13 kg net weight. Each set is supplied in two cartons, with packaged gross weight of 23 kg, reference assembly time of 40 minutes, and carton dimensions of 850 x 420 x 720 mm. The indicative loading figure is 135 sets in a 20GP container at 85 percent space utilization. As an unbranded visitor chair, purchasers should confirm upholstery finish, frame condition, assembly hardware, and batch consistency when coordinating multiple seating installations.